Instruction/ maintenance manual of the product GSS 100 Extron electronic
Go to page of 4
GSS 100 • Setup Guide The Extron GSS 100 is a portable graphic still store with 16 MB of memory that can hold up to 6 XGA (1024 x 768) bitmap images (BMP) or 32 or more XGA JPEG images.
2 Operation Graphic File Considerations z The only valid file formats for stored images are *.bmp and *.jpg. z V alid file names are up to 240 alphanumeric characters with no spaces. z Progressive *.jpg images are not supported. z Bitmap (*.bmp) images must be formatted as 24-bit RGB.
3 Deleting a Stored Image 1. Connect the GSS to a PC or to a network and open the embedded web pages. See the GSS 100 User Guide for greater detail. 2. Click the Images tab to access the Image Settings page. 3. Select (click) the thumbnail of the image to be deleted.
68-974-50 Rev A 04 11 4 Selected SIS Commands The table below shows a partial list of SIS commands the you can use for operation and configuration of the GSS. For a complete listing, see the GSS 100 User Guide . Run the following commands from a PC connected to the RS-232 port (item e on page 1).
An important point after buying a device Extron electronic GSS 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic GSS 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic GSS 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic GSS 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic GSS 100 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic GSS 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic GSS 100.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic GSS 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic GSS 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
