Instruction/ maintenance manual of the product DVI DA Plus Series Extron electronic
Go to page of 30
User ’s Guide DVI Distribution Amplifiers DVI DA Plus Series 68-1536-01 Rev . A 09 08.
Pr ecautions This symbol is intended to alert the user of important opera ting and mainten ance (se rvicing ) instru ctions i n the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压，有触电危险。 .
.
DVI DA Plus Series • Quick Start Guide QS-1 Quick Start Guide — DVI DA Plus Series T o install, connect cables, and operate any of the DVI DA Plus Series distribution ampliers, follow these steps: Step 1: Install Install the distribution amplier on a desk, under a desk, or in a rack (see page 2-2).
DVI DA Plus Series • Quick Start Guide Quick Start Guide — DVI DA Plus Series, cont’d QS-2 Step 3: Connect DVI Cables Connect a DVI cable from the Input connector to the video source device (see page 2-9). Connect a DVI cable from the distribution amplier to the desir ed display device(s) (see page 2-9).
i DVI DA Plus Series • T able of Contents i T able of Contents 68-1536-01 Rev . A 09 08 All trademarks mentioned in this manual are the properties of their respective owners. Chapter One • Introduction .............................................
ii DVI DA Plus Series • T able of Contents T able of Contents, cont’d.
DVI DA Plus Series 1 Chapter One Intr oduction About this manual About the DVI DA Plus Series DVI DA Plus Series Features.
DVI DA Plus Series • Introduction Intr oduction 1-2 About This Manual This manual describes the installation, operation, and specications of the Extron DVI DA4 Plus, DVI DA6 Plus, and DVI DA8 Plus Distribution Ampliers.
DVI DA Plus Series • Introduction 1-3 DVI DA Plus Series Features EDID Minder — The EDID Minder maintains continuous EDID (Extended Display Identication Data) communication with the attached source. This ensur es that the DVI source powers up correctly and maintains a pr oper video output, even if the display is off.
DVI DA Plus Series • Introduction Introduction, contd 1-4.
DVI DA Plus Series 2 Chapter T wo Installation and Operation Installation Overview Mounting the Distribution Amplifier Front Panel Features Rear Panel Features Operation T roubleshooting.
DVI DA Plus Series • Installation and Operation Installation and Operation 2-2 Installation Overview All three distribution ampliers can be mounted on tabletops, under furniture, and in racks by following these steps: 1.
DVI DA Plus Series • Installation and Operation 2-3 Reliable earthing (grounding) — 5. Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).
DVI DA Plus Series • Installation and Operation Installation and Operation, cont’d 2-4 Rack mounting the DVI DA6 Plus and DVI DA8 Plus The DVI DA6 Plus and DVI DA8 Plus distribution ampliers can be mounted using the Extron MBD 149 rack mount kit (provided) as follows: 1.
DVI DA Plus Series • Installation and Operation 2-5 Under -desk mounting Mount the DVI DA6 Plus or DVI DA8 Plus (not shown) under furniture, using the optional Extr on MBU 149 under-desk mounting kit (part # 70-222-01 ).
DVI DA Plus Series • Installation and Operation Installation and Operation, cont’d 2-6 Front Panel Featur es The front panels for the DVI DA4 Plus (upper panel) and the DVI DA6 Plus/DVI DA8 Plus (.
DVI DA Plus Series • Installation and Operation 2-7 Rear Panel Features The rear panels for the DVI DA4 Plus (top panel), the DVI DA6 Plus (middle panel), and DVI DA8 Plus (bottom panel) are shown below: 12V 1.0A MAX POWER DVI-D INPU TD VI-D OUTPUT 1234 DVI DA4 Plus 2 3 4 12V 1.
DVI DA Plus Series • Installation and Operation Installation and Operation, cont’d 2-8 Power supply input Connect the two pole, 3.5 mm captive screw connector fr om the power supply (provided with the unit) to this orange socket on the rear panel.
DVI DA Plus Series • Installation and Operation 2-9 Input cable connections Connect a single link DVI-D source device, with a r esolution range up to 1920 x1200 or 1080p @ 60 Hz, to the female DVI-I input, using a DVI cable.
DVI DA Plus Series • Installation and Operation Installation and Operation, cont’d 2-10 DVI connector pin assignments The illustration below shows the pin assignments for the DVI-I connectors. N Although DVI-I dual link connectors are used, these distribution amplifiers are only compatible with single- link DVI-D video signals.
DVI DA Plus Series • Installation and Operation 2-11 Operation 1. Connect the captive screw connector fr om the supplied 12 VDC power supply into the power receptacle on the rear panel. Do not power on the power supply yet. 2. Connect the source device to the DVI input r eceptacle on the rear panel.
DVI DA Plus Series • Installation and Operation Installation and Operation, cont’d 2-12 T roubleshooting No output signal — Check that the front panel LED is on (amber shows that the unit is receiving power , green shows that it is also receiving an input signal).
DVI DA Plus Series A Appendix A Refer ence Information Specifications Included Parts Accessories.
DVI DA Plus Series • Reference Information Refer ence Information A-2 Specifications N *Appropriate DVI-D to HDMI cables or adapters ar e requir ed for HDMI signal input/output. Video Maximum data rate....................... 4.95 Gbps (1.65 Gbps per color) Maximum pixel clock .
DVI DA Plus Series • Reference Information A-3 Enclosure dimensions DVI DA4 Plus ....................1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.) DVI DA6 Plus, DVI DA8 Plus 1.
DVI DA Plus Series • Reference Information Refer ence Information A-4 Included Parts These items are included in each DVI DA Plus series amplier: Included parts Replacement part number DVI DA4 Pl.
Extron’ s W arranty Extron Electr onics warrants this product against defects in materials and workmanship for a period of three years fr om the date of purchase.
© 2008 Extron Electronics. All rights reserved. Ex tron US A - We st Headquar te rs + 80 0.6 33 .9 87 6 I nside U S A / C anad a On ly +1 .7 1 4.4 91 .1 50 0 +1 .7 1 4.4 91 .1 51 7 FA X Ex tron US A - East + 800 .6 33 .9 87 6 I nside U S A / C anad a On ly +1 .
An important point after buying a device Extron electronic DVI DA Plus Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic DVI DA Plus Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic DVI DA Plus Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic DVI DA Plus Series you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic DVI DA Plus Series will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic DVI DA Plus Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic DVI DA Plus Series.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic DVI DA Plus Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic DVI DA Plus Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
