Instruction/ maintenance manual of the product DTP DVI 230 Extron electronic
Go to page of 19
User Guide DTP DVI 230 HDMI & DVI Extenders DVI T wisted Pair Extender 68-2341-01 Rev . B 06 13.
Safety Instructions • English W ARNING : This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated danger ous voltage within the product’ s enclosur e that may present a risk of electric shock.
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rules. The ClassA limits provide r easonable protection against harmful interfer ence when the equipment is operated in a commercial environment.
.
v DTP DVI 230 Tx/Rx T ransmitter and Receiver • T able of Contents Contents Introduction ............................................................ 1 About this Guide ................................................. 1 About the DTP DVI 230 Tx/Rx T ransmitter and Receiver .
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Introduction vi.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Introduction 1 Intr oduction • About this Guide • About the DTP DVI 230 T ransmitter and Receiver • Features About this Guide This guide .
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Introduction 2 The transmitter is shipped with a single external desktop 12 VDC power supply that accepts 100 to 240 V AC, 50‑60 Hz input. A single power supply connected to either the transmitter or the receiver can power both units thr ough the TP cable that carries DVI video.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 3 Installation and Operation This section describes the installation and the operation of the DTP DVI 230 Tx/Rx Extender , in.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 4 b Local Output connector — If desired, connect a DVI monitor for local monitoring of the input digital image. NOTES: • The local output is limited to a data rate of 4.95 Gbps (1.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 5 Receiver Connections F ron t Rear L R OUTPUTS DVI-D AUDIO DTP DVI 230 Rx Rx G Tx RS-232 IR Rx Tx POWER 12V 0.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 6 j RS-232 and IR connector — Connect a serial RS‑232 signal, a modulated IR signal, or both to this 3.5 mm, 5‑pole captive screw connector for bidir ectional RS‑232 and IR communication (see RS-232 and IR connector wiring on page 9 to wire the connector).
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 7 Supported cables — The DTP DVI 230 is compatible with CA T 5e, 6, 6a, and 7 shielded twisted pair (F/UTP , SF/UTP , and S/FTP) and unshielded twisted pair (U/UTP) cable.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 8 Power supply wiring NOTES: • One power supply is included with the transmitter and normally can power both units.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Installation and Operation 9 RS-232 and IR connector wiring Figure 7 shows how to wir e the RS‑232 connector .
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Reference Information 10 Refer ence Information This section provides pr ocedures for mounting the DTP DVI 230 Tx/Rx transmitter and receiver and disconnecting the gr ound between them.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Reference Information 11 UL Rack-Mounting Guidelines The following Underwriters Laboratories (UL) requir ements pertain to the installation of the unit into a rack.
DTP DVI 230 Tx/Rx T ransmitter and Receiver • Reference Information 12 3. Locate, lift off , and discar d jumpers JMP2 and JMP3 from both units (see figur e 10). Tr ansmit te rR eceiv er J MP3 JMP2 JMP2 J MP3 Figure 10. Jumper Locations 4. Reinstall the covers on both units, securing them in place with the screws r emoved in step 2.
Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - W est Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 F AX +1.919.850.1001 F AX Extron Europe +800.3987.6673 (Inside Europe Only) +31.33.453.4040 +31.33.453.4050 F AX Extron Asia +65.
An important point after buying a device Extron electronic DTP DVI 230 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic DTP DVI 230 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic DTP DVI 230 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic DTP DVI 230 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic DTP DVI 230 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic DTP DVI 230, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic DTP DVI 230.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic DTP DVI 230. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic DTP DVI 230 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
