Instruction/ maintenance manual of the product 600 Extron electronic
Go to page of 12
1 T eamW ork ™ Kits • Installation Guide T eamW ork 400 and T eamW ork 600 Kits The T eamW ork 400 and T eamW ork 600 kits consist of an HDMI switcher , system controller , Cable Cubby ® , and cables packaged together as a complete system that, in most cases, requir es no conguration.
T eamW ork Kits • Installation Guide (Continued) 2 T eamW ork VGA Kit The T eamW ork VGA kit adds support for legacy analog computer sources to the T eamW ork 400 and T eamW ork 600 collaboration systems.
3 T eamWork 400 and T eamW ork 600 Kits T eamW ork 400 T eamW ork 400i T eamW ork 600 T eamW ork 600i HDMI switcher 1 (SW4 HDMI, 4 input) 1 (SW4 HDMI, 4 input) 1 (SW6 HDMI, 6 input) 1 (SW6 HDMI, 6 inp.
T eamW ork Kits • Installation Guide (Continued) 4 Display Requirements The T eamW ork system is designed to work with most brands and models of at panel displays available worldwide. For optimum performance, consider the following when selecting the displays for your T eamW ork installation.
5 Installation Install the Power Modules in the Cable Cubby Detailed instructions are in the Cable Cubby Setup Guide . Extron r ecommends the layout shown to the right with AAP shelf assemblies on either side of the power modules.
T eamW ork Kits • Installation Guide (Continued) 6 Mounting and Placement of System Components Decide where you will install your T eamW ork system and where the individual components will be placed. z The Cable Cubby should provide easy access for as many users as possible.
7 Cabling Extron SHARE 0.3A M AX POWER 1 2V 1 Tx Rx RS-232 AUTO 234 INPUTS SW4 HDMI REMOTE 1 2 3 4 G CONTACT 1 2 3 4 +V TALLYOUT OUTPUT 100-120V 50/60Hz 12A MAX POWER OUTPUT 12A MAX LAN COM TX IN S G .
T eamW ork Kits • Installation Guide (Continued) 8 “Show Me” Cables The Extron “Show Me” cables ar e for use with Extron T eamW ork systems. They feature a Shar e button for remote input source selection and a control pigtail, which may be wir ed directly into Extr on switchers with contact closure and tally outputs.
9 VGA “Show Me” Cables 1. Connect the input end of the VGA “Show Me” cable to the source device. 2. Connect the output of the “Show Me” cable to the VGA input of the analog-to-digital converter . 3. Connect the HDMI cable from the digital output of the converter to the HDMI input of the switcher .
T eamW ork Kits • Installation Guide (Continued) 10 Connect the Switcher to the Display Device Connect the switcher HDMI output to the HDMI input of the display device, using the provided cable. Do not use HDMI to DVI adapters. If necessary , see the user guide for the display device.
11 T esting the System The T eamW ork system has been pre-congured so that, once all the connections have been made and the devices ar e all powered on, ther e should be no need of further conguration for the system to work. T o ensure that the system has been set up correctly , follow these steps: 1.
12 68-2400-50 Rev . C 08 13 Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +1.919.850.1001 FAX Extron Europe +800.3987.6673 (Inside Europe Only) +31.
An important point after buying a device Extron electronic 600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic 600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic 600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic 600 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic 600 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic 600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic 600.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic 600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic 600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
