Instruction/ maintenance manual of the product OM-900M Evolution Technologies
Go to page of 32
PRODUCT INFORMATION AND INSTRUCTIONS OM-900M.
TABLE OF CONTENTS General Information ............................................. 3 Important Safety Rules and Precautions Operating theUnit ......................................... 4-6 Accessories/Repairs ............................
Care and Maintenance Hygienic Preparation ....................................... 17 Intervals ................................................. 17 Procedure ................................................ 18 Patient Change ....................
This manual provides the information necessary to operate the EVOLUTION TM MOTION electronic oxygen conserver with built-in regulator in accordance with a physician’s prescription. The EVOLUTION TM MOTION conserver can be used with any CGA 870 post-valve cylinder (see Fig.
IMPORTANT SAFETY RULES & PRECAUTIONS Read this instruction manual carefully to ensure your complete understanding before operating your EVOLUTION TM MOTION electronic conserver. This manual is part of the unit and must be available at all times. Use the unit for the designated purpose only (see “Purpose” on page 7).
IMPORTANT SAFETY RULES & PRECAUTIONS WARNING! (Cont.) Please remember that this is for your own safety! • Keep all parts free of oil and grease. Hydrocarbon compounds such as oil, grease, petrol.
CAUTION! (Cont.) • Oxygen conserving systems only work reliably upon sufficiently strong inhalation. Therefore, please observe the following: • Do not use the EVOLUTION TM MOTION at night or while.
INTRODUCTION PURPOSE The EVOLUTION TM MOTION electronic conserver is designed for use as part of a portable ambulatory oxygen system for the purpose of facilitating long-term oxygen therapy (LTOT). It provides mobile LTOT patients with an extended operating time of their mobile system.
INTRODUCTION 8 FUNCTION The EVOLUTION TM MOTION OM-900M oxygen therapeutic device, which combines a regulator, motion sensor, and an oxygen conserver, is designed for use as part of an ambulatory oxygen system. When we breathe, approximately one-third of the time is spent inhaling, and two-third exhaling.
DESCRIPTION OF PARTS & CONTROLS FIGURE B EVOLUTION TM MOTION Conserver Top View Oxygen Pressure Gauge Cylinder Adjustment Handle Selector Knob Low Battery Indicator Light FIGURE D EVOLUTION TM .
• Low Battery Indicator Light: The EVOLUTION TM MOTION conserver incorporates a visual indicator light that alerts you when a battery change is needed. The following signal will be displayed as your batteries become depleted: Blinking red light - Low battery energy level.
11 ASSEMBLY AND USE • Make certain that your hands are free of oil, grease, and other contaminants. • Inspect the unit to insure that it has a manufacturer-specified seal washer in good working condition attached to the inlet nozzle. • Secure the cylinder in an upright position.
12 INSTALLING ALKALINE BATTERIES The EVOLUTION TM MOTION conserver uses advanced technology that prolongs battery life through efficient power use. With normal use of four (4) hours per day at any setting, your batteries should last a minimum of one (1) year.
ASSEMBLY AND USE MONITORING BATTERY ENERGY LEVEL: The EVOLUTION TM MOTION conserver is equipped with a low battery indicator light that alerts you when a battery change is needed. The following signal will be displayed as your batteries become depleted: Blinking red light – Low battery energy level.
OPERATING INSTRUCTIONS: STEP 1: Make sure the EVOLUTION TM MOTION conserver is set to the “ PULSE ” position. Battery saving technology has eliminated the need for an “OFF” position. The unit will go to “Sleep Mode” after three minutes of non-use.
15 ASSEMBLY AND USE OPERATING INSTRUCTIONS (Cont.): The Active setting should be used during exercise or activity and the Rest setting should be used when inactive or at rest. The Rest and Active settings should be selected in accordance with a physician’s prescription or with a physician’s approval.
M2 36 liters 3.0 1.5 1.0 0.8 0.6 0.5 0.3 M4(A) 113 liters 9.4 4.7 3.1 2.4 1.9 1.6 0.9 M6(B) 164 liters 13.7 6.8 4.6 3.4 2.7 2.3 1.4 ML6 171 liters 14.3 7.1 4.8 3.6 2.9 2.4 1.4 M7 198 liters 16.5 8.3 5.5 4.1 3.3 2.8 1.7 M9(C) 246 liters 20.5 10.3 6.8 5.
17 CARE AND MAINTENANCE The EVOLUTION TM MOTION conserver is designed for a long and accurate life; however, as with any electronic device, prudent care is required. The unit should be kept clean and free from moisture and dust, as well as extreme temperature.
18 CARE AND MAINTENANCE PROCEDURE Carry out hygienic preparation of the unit and accessories as described on page 16. We recommend using a 0.5% TERRALIN solution for wipe disinfection. Follow the instructions enclosed with the disinfectant. WARNING! • Take special care that no liquids enter the unit, as this may cause damage.
19 CARE AND MAINTENANCE FUNCTIONAL CHECK CHECKING FOR LEAKS 1. Close the valve on the oxygen cylinder. 2. Depressurize the EVOLUTION TM MOTION by inhaling several times using the nasal cannula. The gauge indicator should drop to zero. 3. Check that all screwed unions and tube connections are tight.
STANDARD PRODUCT ORDER NUMBER DESCRIPTION OM-900M EVOLUTION TM MOTION with CGA 870 Connection SPARE PARTS ORDER NUMBER DESCRIPTION RP-3040 Black “S” Cylinder Adjustment Handle FR-870G Seal Washers (U.
21 PROBLEM PROBABLE CAUSE SOLUTION Software needs to be reset Dead batteries. Batteries installed incorrectly (reversed). Dirty battery holder contacts. Cylinder valve is closed. Cylinder is empty. Oxygen cannula is blocked or kinked. Non-alkaline batteries are used.
PROBLEM PROBABLE CAUSE SOLUTION 22 The Active Mode setting must be equal to or higher than the Rest Mode setting The device may be interpreting the car’s motion as activity The battery may be dead o.
23 CLASSIFICATIONS AND SPECIFICATIONS TECHNICAL DATA SPECIFICATIONS EVOLUTION TM MOTION Product class according to 93/42/EEC IIb Dimensions (L x H x W) 6.1” L (15.5 cm) x 2.5” H (6.4 cm) x 3.1” W (7.9 cm) Weight Approximately 14.9 ounces (422 grams) with batteries Input pressure 200 to 3000 PSI (13.
24 CLASSIFICATIONS AND SPECIFICATIONS SPECIFICATIONS (Cont.) Oxygen delivery at level: Liter Flow Equivalency 1 1 2 2 3 3 4 4 5 5 6 6 Continuous flow 2 LPM ±0.
25 CLASSIFICATIONS AND SPECIFICATIONS SPECIFICATIONS (Cont.) Classification according to EN 60601-1 • Degree of protection against electric shock Type BF • Degree of protection against harmful ing.
26 CLASSIFICATIONS AND SPECIFICATIONS SEPARATION DISTANCES Recommended separation distances between portable and mobile RF Communications equipment and the EVOLUTION TM MOTION. The EVOLUTION TM MOTION is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled.
27 CLASSIFICATIONS AND SPECIFICATIONS SYMBOLS KEY SYMBOL MEANING Warning, consult accompanying documents Refer to the instruction manual TYPE PLATE Year manufactured Degree of protection against elect.
28 LIMITED WARRANTY The EVOLUTION TM MOTION oxygen conserver has been carefully manufactured and inspected and is warranted to be free from defects in workmanship and materials.
29 IMPORTANT INFORMATION TO RECORD Your Name: __________________________________________________________________ Date You Received Your Unit: ____________________________________________________ Presc.
30 NOTES.
Parent Company Drive Medical Design & Manufacturing 99 Seaview Boulevard Port Washington, NY 11050 Toll-free: 877-224-0946 www.drivemedical.com 401 Leonard Blvd. N Lehigh Acres, FL 33971 T oll-free: 888-446-6862 www .chadtherapeutics.com MDSS Schiffgraben 41 30175 Hanover , Germany PM-00042/13/E Printed in the U.
An important point after buying a device Evolution Technologies OM-900M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Evolution Technologies OM-900M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Evolution Technologies OM-900M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Evolution Technologies OM-900M you will learn all the available features of the product, as well as information on its operation. The information that you get Evolution Technologies OM-900M will certainly help you make a decision on the purchase.
If you already are a holder of Evolution Technologies OM-900M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Evolution Technologies OM-900M.
However, one of the most important roles played by the user manual is to help in solving problems with Evolution Technologies OM-900M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Evolution Technologies OM-900M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
