Instruction/ maintenance manual of the product CGHE1 Everpure
Go to page of 8
CGHE1 Installation & Operating Guide Faucet Compatibility T ools and Safety Equipment y ou may need (not pr ovided) Only “Open Vent” faucets function with a instant hot water dispenser tank. Connecting a standard faucet will damage the tank and void the warranty .
IMPORT ANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS VER Y CAREFULL Y When using electrical appliances, basic safety precautions should always be followed including the following: ELECTRICAL REQUIREMENTS Recommended Ground Method 1. Read all instructions.
Faucet may be installed in spray hose opening in sink or drilled hole. If faucet is not to be installed in sink spray hose opening, cut 1 1 / 16 ” (27mm) min. — 1 3 / 8 ” (35mm) max. dia. hole. Important: Observe all governing codes and ordinances.
Step 1 - Mounting T ank Position tank vertically beneath faucet so the flexible tube from the faucet reaches the center faucet supply tube on the tank and tank touches the wall. Mark the wall at the top of tank. Set tank aside. Mark a second line 2 1 / 8 ” (54 mm) belo w the first line.
“T” connection with Shut-Off V alve EV312120 Installation shut-off valve (use EV312120) “T” connector TYPICAL INST ALLA TIONS Step 4 - Connect Cold W ater Supply Check Filter in Quick-Connect .
Step 5 - Check f or Leaks Open valve in water line. T urn faucet on (hold if necessary) to fill tank (about 1 minute). When tank is full, water will flow from faucet. T urn faucet off. Check for leaks. Step 6 - Prepare for P ower Double check thermostat control dial is in the OFF position.
CLEANING AND MAINTENANCE Seasonal Shutdown T o prevent damage when dispenser is exposed to freezing temperatures, water must be drained. 1. Unplug dispenser tank to power supply . 2. T urn thermostat control dial to OFF position (fully counterclockwise).
TROUBLESHOOTING The following situations are not covered by the One Y ear Replacement Warranty . 1. Water is not hot: (assuming cold water supply is connected properly and valve is open) • Check if dispenser is plugged in. • T urn thermostat control dial fully clockwise.
An important point after buying a device Everpure CGHE1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Everpure CGHE1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Everpure CGHE1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Everpure CGHE1 you will learn all the available features of the product, as well as information on its operation. The information that you get Everpure CGHE1 will certainly help you make a decision on the purchase.
If you already are a holder of Everpure CGHE1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Everpure CGHE1.
However, one of the most important roles played by the user manual is to help in solving problems with Everpure CGHE1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Everpure CGHE1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
