Instruction/ maintenance manual of the product EQ350 EverFocus
Go to page of 11
EVERFOCUS 1/3” Sony CCD Aluminum Box Housing Color Camera Operation Instructions Model No. EQ350/EQ250 Please read this manual first for correct installa tion and operation. This m anual should be retained for future reference. The information in this m anual was curren t when published.
1 7. Do not operate the camera beyond th e specified temperatur e, humidity or power sour ce ratings. Use the camera at temperatures within -10°C~50°C (14°F~122°F) and hum idity between 20%~ 80%. The input power source are 12VDC/24V AC; 100~240V AC.
2 SPECIF ICA TIONS Type EQ350 EQ250 Pickup Device 1/3'' SONY Super HAD CCD Picture Elements NTSC: 768(H) x 494(V) P AL: 752(H) x 582(V) NTSC: 510(H) x 492(V) P AL: 500(H) x 582(V) Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec Horizontal Resolution 560TVL 380TVL Sensitivity 0.
3 DIMENSIONS.
4 HARDW ARE OVER VIEW Front 8 2 1 Side Back Side 3 6 7 4 5 10 11 9 11 10 9 9 Dual Power Model with Audio Pigtail Power Model with Audio Pigtail Power Model without Audio Dual Power Model without Audio.
5 1. C/CS mount Focus Switch Ring Use this ring to adjust the appropriate focal le ng th according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is CS-mount. 2.
6 8. Mounting Base and Fixing Screws The mounting base can be attached to either the top or the bottom of the camera, fix the mounting base onto the camera by using the 4 fixing screws in the accessory pack. 9. Video Output Connector BNC VBS 1.0 Vp-p, 75ohm 10.
7 INST ALLA TION 1. Remove the lens cover cap. 2. If a C-mount lens is used, please make sure to turn the C-mount/CS-m ount focus switch ring at C position before fixing the lens . The default is CS mount. 3. Screw the lens firmly onto the lens mount.
8 Camera Setting DIP Sw itch Fluorescent ON/OFF This is a compensation function fo r against the images flicker fi ercely during fluorescent light condition. Shooting the images in fluorescent light by using turn on th e Fluorescent function, the default setting is Off.
9 frequency (60Hz) is possible bu t not available in using DC or other operation power such as NTSC in 50Hz or PAL in 60Hz power system. VD/DD (Auto Iris lens T ype) For video drive auto iris lens, pleas e set switch to VD. For direct drive iris lens, set switch to DD.
10 EverFocus Electr onics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA L.A. Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
An important point after buying a device EverFocus EQ350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EQ350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EQ350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EQ350 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EQ350 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EQ350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EQ350.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EQ350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EQ350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
