Instruction/ maintenance manual of the product EHH5200 EverFocus
Go to page of 25
2 Megapi xel Full HDcctv Outdoo r Dome Ca mera Operation Instructions Model No. EHH5200 Please read this manual first for cor rect inst alla tion and operation. This manual should be retaine d for future reference. The information in this manual was curre nt when published.
- 1 - T ABLE OF CONTENTS 1. PRODUCT OVERVIE W ... .... .. .... ... ... .... .. .... ... ... .... .. ... .... .. .... ... ... .... .. .... ... ... ... ... .... ... .. .... ... ... .... .. 3 1.1 Main Features .. .........................................
- 2 - 4.3 Day/Night ............................................... ................................................................................. .................... 21 4.4 Special .................................................................
- 3 - 1. PRODUCT OVERVIEW The EHH52 00 is an HDcctv outdoor dome camera with true Day/Night capability in an IP66 vandal resistant housin g. Based on a 2 mega pixel progressive scan sen so r for your choice of 1080 or 720 reso luti on HD 100% dig it al image s, it deliver s vastly supe rior video quality compared to traditional C CTV images.
- 4 - V id eo T es t Ca bl e x 1 P owe r S up pl y P ig t ai l x 1 De si c c a nt P ac k x 1 Please Note: If an item ap pears to have been damaged in shipment, r eplace it p roperly in its carton and no tif y the sh i pper. If any items a re mis sing, n otify yo ur Ev erFocus Electron ics C orp.
- 5 - 1.3 Specifications Pickup Device 1/2.7" 2 megapi xel CMOS senso r Image area for FOV 1 080 mode: 6.61 mm diagonal; 5.76 mm H x 3 .24 mm V Image area for FOV 7 20 mode: 4.
- 6 - Ø 5.143mm//0.2” Ø 94.7mm/3.78” 1.4 Dimensions 123mm x 107.8mm ; 4.8” x 4 . 2”.
- 7 - (3) 2. NAMES AND FUNCTIONS OF PARTS 2.1 Camera Component Description Exterior view 2.2 Front And Back Panel Layout Front Panel Layout : Rotatable cover Outer Cover ring Base (4) (1) (2).
- 8 - Back Panel Layout: (1) External Light Sensor External Light sensor is used to detect the lighting leve l the env ironment. (The light sens or is “down” wh en t he interna l camera module is properly positioned) . (2) Zoom Ring T o adjust the viewing angle, loosen the zoom ring kn ob.
- 9 - When ins t alling the camera , you can use this video connector to conne ct a portable mon itor . This will allow you to easily adjust camer a’s field of view an d f ocu s. (6) OSD Menu joystick: Use the joystick to move the cursor U pwards/Downwards.
- 10 - • Do not expo se the camera to water or moisture while o pen during i nstallation, nor try to operate it while ope n i n wet area s. Once prop erly installed and sealed, the dome is IP66 rated aga inst water infiltration. 3.1 Mounting Camera 3.
- 11 - 3.1.2 Mounting 1. T ake off camera’s cover by rotating the cover counter clockwise. T ake off camera’s cover Loose outer cover ring first.
- 12 - 2. Pull the cables to be conn ect ed to the pow er and video cables from the ceiling or wall. 3. Fix the ca mera b ase to c eiling or wa ll by u sing 3 screw s and washers.
- 13 - Wall Mount: 3.2 Adjusting Camera 3.2.1 Adjusting Camera Position Adjust the camera to any an gle that you w ish. Pan and tilt to aim the camera at w hat you need to watch until the best angle of image is obtained. Adjust the camera to best an gle for viewing.
- 14 - NOTE : 1. If n ecessary , you can p ut desiccant pa ck in bra cket side. Use cable to fix it befor e placing the cover back to camera. 2. T o close came ra cover, p lease p ush the in ner co ve.
- 15 - 1. Loosen the zoom ring k nob, and then turn the rin g towards <W> or <T> as necessary to o btain the desired view angle. W side (Zoo m out) The view ing range will be wider and the subject is smaller . T side (Zoom in) The view ing range will be smaller and the subject is larg er .
- 16 - T urn the exter nal ring 3. If the lens is no t aligne d w ith the window, loosen the ou ter c over , adjust the inner cover so tha t the lens aimed exactly at the window .
- 17 - 4. OSD Menu & Configuration Access the user setup menu scr een: I. Pres s i nward on the end of the joystick The menu screen will app ear on the monitor . II. Navigating with the joys tick Angle the joys tick or to move the cursor up or down.
- 18 - Menu T r ee.
- 19 - Press Set button to enter SETUP Menu. In SETUP menu, us e t he joys tick to mak e se ttings. User can do camera s ettings including Exposure, W hite balance, Day/Night, S pecia l and Image adjust . Please s elect the item by moving the joystick UP or D OWN t hen press SET t o enter the settings.
- 20 - 4.1.2 Shutter Select the shutter mode by moving the joystick LEFT or RIGHT . Select from Auto,1/50,1/60,1/100,1/120,1/250,1/500 ,1/700,1/1000,1/1600,1/2500 ,1/5000 and 1/8000. 4.1.3 AGC (Auto Gain Cont rol – basic low light signal amplificat ion) Select the level you would l ike to cho ose by moving the joystick LEFT or RIGHT .
- 21 - Select “Return ” t o return to the previous menu. 4.3 Day/Night These settings control the op eration of the camera when t he illumination le vel changes. C hoices are Color at all times; B/W at all times ; or color when illumination is bright, switching to B/ W in low light.
- 22 - 4.4.3 D-Effec t In this sec tion, user can do camera settings including Mir ror , Gamma an d N eg_Image. Plea se select the item by moving the joys tick UP or DOW N. S elect “R eturn” to return to the previous menu . 4.4.3.1 Mirror Select one of the 4 mode s below by moving the joystick LEFT or RIGHT .
- 23 - 4.4.6 Default Select “Y es” to load system settings to default factory value s. Or s elect “No” to disre gard this option. 4.5 Image Adjust In this section, user can adjust Sharpness, Brightness and Contrast of the image. Please select the item by moving the joystick UP or DOWN .
- 24 - EverFocu s Elect ron ics C orp . EverFocus T aiwan: 12F , No.79, Sec. 1, Shin- T a i W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886 2 2698 2334 F AX: +886 2 2698 2380 www .
An important point after buying a device EverFocus EHH5200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EHH5200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EHH5200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EHH5200 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EHH5200 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EHH5200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EHH5200.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EHH5200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EHH5200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
