Instruction/ maintenance manual of the product S100 Event electronics
Go to page of 5
USER GUIDE.
Thank you for choosing the S100 Active Low Frequency Monitor . T o get the most from your new subwoofer , please take a moment to read this manual and familiarize yourself with the product’s features, set-up, and use. Unpacking The shipping container is designed to protect your subwoofer during transit.
• Muting the S100 output . Plug the included 1/4” footswitch into the On/Mute footswitch jack. Depressing the switch once will mute the output from the S100. Pressing it again will restore output. Note that the mute function applies only to audio generated by the S100.
S100 Active Low Frequency Monitor Specications Low Frequency Driver 8” polypropylene cone with damped rubber surround and high-temperature voice coil.
S100 Active Low Frequency User Guide ©2003 Event Electronics, LLC P .O. Box 4189 Santa Barbara, CA 93140-4189 www .event1.com Event Electronics® is a registered trademark of Event Electronics, LLC. S100 is a trademarks of Event Electronics, LLC. All rights reserved.
An important point after buying a device Event electronics S100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Event electronics S100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Event electronics S100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Event electronics S100 you will learn all the available features of the product, as well as information on its operation. The information that you get Event electronics S100 will certainly help you make a decision on the purchase.
If you already are a holder of Event electronics S100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Event electronics S100.
However, one of the most important roles played by the user manual is to help in solving problems with Event electronics S100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Event electronics S100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
