Instruction/ maintenance manual of the product S250 TM Event electronic
Go to page of 8
® 20/20 ™ S250 ™ System S ubw oofer USER GUIDE.
20/20 S250 SYSTEM SUBWOOFER GUIDE 2 T hank you for choosing the 20/20 S250 System Subwoofer . T o get the most from your new subwoofer , please take a moment to read this manual and familiarize yourself with the product’s features, set-up, and use.
20/20 S250 SYSTEM SUBWOOFER USER GUIDE Setup The monitoring for mat and room size generally dictate subwoofer set-up. The 20/20 S250 System Subwoofer suppor ts Mono, Stereo, and 5.
Connections and Operation The 20/20 S250 is ideally suited for monitoring the LFE channel, extending the overall low frequency response of an active monitoring system, or doing both simultaneously . • LFE monitoring only . Feed the LFE signal via the LFE input connector and set the subwoofer level with the LFE Input Sensitivity control.
Event Direct Field Monitors, we r ecommend the settings found in the table on page 6. • Extending the low frequency response of your active monitoring system.
20/20 S250 SYSTEM SUBWOOFER USER GUIDE 6 Event Monitor 20/20 bas PS8 • TR8 PS6 PS5 • TR5 Sub Offset Outside Circle 0 +3’ +6’ +9’ 0 +3’ +6’ 0 +3’ +6’ Monitor - Sub Crossover Frequency.
Contacting Customer Service If you experience any trouble with your 20/20 S250 System Subwoofer , please call the Event Electronics Customer Ser vice depar tment at 805-566- 7777, ext. 5. Befor e calling, however , we ask that you please consult the T echnical Suppor t section of our W eb site, www .
20/20 S250 System Subwoofer Specifications (cont.) Indicators: Power ON/Overload LED Power Requirements: 300V A, factor y pr ogrammed for either 120V~ 60Hz, 220-240V~ 50-60Hz, or 100V~ 50-60Hz mains P.
An important point after buying a device Event electronic S250 TM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Event electronic S250 TM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Event electronic S250 TM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Event electronic S250 TM you will learn all the available features of the product, as well as information on its operation. The information that you get Event electronic S250 TM will certainly help you make a decision on the purchase.
If you already are a holder of Event electronic S250 TM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Event electronic S250 TM.
However, one of the most important roles played by the user manual is to help in solving problems with Event electronic S250 TM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Event electronic S250 TM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
