Instruction/ maintenance manual of the product Stand N Ride EV Rider
Go to page of 16
USER’S MANUAL EV Rider, LLC 6410 Arc Way • Suite A • Fort Myers • FL 33966 www.evrider.com • 1.800.944.1997.
IMPORTANT SAFETY NOTICE It is important to read and follow all the instructions and safety information contained in this Owner's Manual prior to use. - Always wear a safety helmet (which is provided with each SNR scooter). - Do not operate at night.
TABLE OF CONTENTS Important Safety Information General Information Riding T errain Mechanical Systems About the Batteries Additional Safety Information Stand N Ride Overview Diagram Assembly Instructi.
IMPORTANT SAFETY INFORMATION It is important to read and follow the instructions and the safety information contained within this owner's manual prior to use. General Information The SNR is a recreational battery-operated vehicle. It is not a mobility device for medically prescribed use and should not be used as such.
Mechanical Systems Check all joints, hinges and quick releases to ensure that the Stand N Ride is properly assembled. Stop using the product immediately if any joint, hinge or quick release becomes loose. Re-tighten the joint, hinge or quick release prior to resuming the ride.
Additional Safety Information Adjust the handle bar height to provide a comfortable and secure riding position on the Stand N Ride scooter . The rider's hands should be able to easily grasp the handle bar controls (throttle and brake lever).
Stand N Ride Overview FWD/REV Headlight Horn Fast/Slow Battery Gauge ON/OFF Brake Throttle Hub Motor/Drive Wheel Rear Wheel Anti-Tippers Battery Pack T ake-Apart Optional Seat Basket Page 6.
Assembly Instructions Your Stand N Ride is shipped in two boxes: 1 containing the tiller and 1 containing the base frame. After you have removed the Stand N Ride components from the protective packagi.
Installing the Optional Seat Assembly: Locate all the seat assembly components and have them at hand to begin the installation of the seat assembly (Fig 5). - Remove the seat-post locking collar from the main seat-post tube to allow insertion of the tube through the base frame from the bottom up (fig 6).
Coupling the Tiller to the Base Frame: - Remove the secondary safety knob from the tiller coupler pin to allow the pin to slide through the base frame receiver . - Align the tiller coupler pin with the base receiver tube and slide it over the tiller pin (Fig 11).
Before You Ride Checklist Before riding the Stand N Ride electric scooter , be sure to carefully follow the checklist below: - Read and understand the Important Safety information section of your Owner’ s Manual. - Make sure that the battery pack has been fully charged.
the unit and become proficient riding it. 7. Gr adually apply the throttle until the desired speed is achieved. Once again, we recommend that you do not venture to full speed operation until you have become proficient with the scooter and only if you are certain that there are no obstacles in site on an open field.
Basic Maintenance The Stand N Ride has been designed to provide years of trouble-free riding enjoyment, provided that the user takes care of it by not leaving it exposed to the elements, neglecting to charge it or by using it in any way that is not recommended.
SNR-1000 Black T extured ABS Plastic & Metallic Silver Frame 992 mm / 36.3 in 642 mm / 25.3 in 75 mm / 3 in 136kg / 300 lb (With optional flat-free tires) 19.8 kg / 43.5 lb 18.42 kg / 40.5 lb 12.59 kg / 27. 7 lb 5.85 kg / 11 lb 56.66 kg / 122.7 lb 24 km/h / 15 mph Brushless DC hub motor , 24V , 500W 12.
WARRANTY TERMS ONE-YEAR LIMITED WARRANTY One year on all structural frame components; including tiller , base frame and seat post (if purchased with this option).
NOTES Page 15.
An important point after buying a device EV Rider Stand N Ride (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EV Rider Stand N Ride yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EV Rider Stand N Ride - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EV Rider Stand N Ride you will learn all the available features of the product, as well as information on its operation. The information that you get EV Rider Stand N Ride will certainly help you make a decision on the purchase.
If you already are a holder of EV Rider Stand N Ride, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EV Rider Stand N Ride.
However, one of the most important roles played by the user manual is to help in solving problems with EV Rider Stand N Ride. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EV Rider Stand N Ride along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
