Instruction/ maintenance manual of the product V2022 Euro-Pro
Go to page of 8
2 Speed Cordless Sweeper Model: V202 2 6 Volt DC IMPORTANT IMPORTANT To Maximize the life of your NiCd batteries: 1. Charge for a minimum of 2 0 hours before initial use . Failure to do so will reduce th e product’s battery life significant ly. 2. Do not s tore unit with the charg ing adapter attached and plugged in.
.
1. Do not charge this unit outdoors. 2. Do not use outdoors or on wet surfaces. 3. Do not allow to be used as a toy. Close attention is necessary when used by or near children. 4. Use only as described in this manua l. Use only manufacturer’s recommended attachments.
2 NOTE : The c ordless sweeper is shipped w ith the batteries uncharged. Charging of the unit for 20 hours prior to first use is required. Use replacement b atter y # XB1916 only. * Illustrations may diffe r from actual product. PARTS AND COMPONENTS 1.
Assembling Your Cordless Sweeper Your cordless sweeper will require very li ttle assembly. You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing. (Pg. 2) This will help y ou in the assembly an d operati on of your cordless sweeper.
Fig. 3 Charging Light Indicator 4 OPERATING INSTRUCTIONS 2. This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be charged for a minimum 20 hours . 3. When recharging the unit, the "On /Off" switch mu st be in the "OFF" position .
To Maximize The Life Of Your Ni-cd Batteries 1. Charge for a minimum of 20 hours before initial us e. Failure to do so will reduce the product’s battery life significantly. 2. Do not store the unit with the charging adapt or attached an d plugged in.
OPERATING INSTRUCTIONS 6 Fig. 6 4. Carefully lift out the battery pack and push on the release tab on the termin al connector before separating the wire terminal connectors.
An important point after buying a device Euro-Pro V2022 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro V2022 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro V2022 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro V2022 you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro V2022 will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro V2022, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro V2022.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro V2022. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro V2022 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
