Instruction/ maintenance manual of the product SHARK EP470 Euro-Pro
Go to page of 8
OWNER’S MANUAL Steam Iron Model EP470 For in formation or assistance: : USA: EURO-PRO Corporation Canada: EURO-PRO Corporation 178 West Service Rd. 4400 Bois Franc Champlain, NY 12919 St. Laurent, QC H4S 1A7 Tel.: 800-798-7398 Tel.: 514-842-8691 www.
Model EP470 LIMITED WARRANTY EURO-PRO Corporation warrant s this product to be free fr om defects in mate rial and workmans hip for a period of one (1) year f rom the date of purchase . The liability of EURO-PRO Corporation is limited solel y to the repair or r eplacement of the prod uct at EURO-PRO ’s option.
TROUBLESHOOTING IMPORTANT SAFETY INSTRUCTIONS PROBLEM POSSIBLE REASONS & SOLUTIONS Iron does not heat Thermostat ready light goes On and Off Some odor or small particles come out of steam vents of new iron Iron does not steam Water droplets coming from steam vents • Iron should be plugged into a 120V AC electr ical outlet only.
IRONING CHART NOTE: Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam. To select iro n temperature, align temperature s elected on dial with the indicator on the water tank. DIRECTIONS ON LABEL FABRIC TEMP.
USER MAINTENANCE INSTRUCTIONS (CONT.) ADDITIONAL IMPORTANT SAFEGUARDS 11. Always store your iron o n the iron rest provided with your iron, not on the soleplate. If stored face down, even the smallest amount of moisture will cause the soleplate to corrode and stain.
GETTING TO KNOW YOUR IRON USER MAINTENANCE INSTRUCTIONS Before using your SHARK Sting Ray Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron. When turned on for the first time, your new iron may emit an odor for up to 10 minutes.
OPERATING INSTRUCTIONS (CONT.) FEATURES OF EURO-PRO CORDED/CORDLESS I RON 1. BLAST OF STEAM BUTTON Pressing this Button provides a powerful blast of steam without dripping water. 4. TEMPERATURE DIAL Turn dial to select temperature. Main temperature settings are indicated by the 1, 2 and 3 dots.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS (CONT.) This appliance is for HOUSEHOLD USE ONLY and may be plugged into any 120V AC polarized electrical outlet. Do not use any other type of outlet. 4. Turn the temperature dial to any of the temperatures within the gray steam band and allow the iron to heat for approximately 2 minutes before ironing.
An important point after buying a device Euro-Pro SHARK EP470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro SHARK EP470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro SHARK EP470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro SHARK EP470 you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro SHARK EP470 will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro SHARK EP470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro SHARK EP470.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro SHARK EP470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro SHARK EP470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
