Instruction/ maintenance manual of the product DRESSMAKER 1104HB Euro-Pro
Go to page of 6
OWNER’S MANUAL Models: 1104HB – 1104HG – 1104HP – 1104HV – 1104HW EURO-PRO Operating LLC 4400 bois Franc, St. Laurent Qc H4S 1A7 Tel.: 1 (800) 361-4639 EURO-PRO Operating LLC – All rights .
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, safet y precautions should always be followed, including the following: Read all instructions before using this sewing machine. Danger – To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in or with batteries in place.
NAME OF PARTS 2 NEEDLE REPLACEMENT Caution: Remove the batteries and/or disconnect the AC/DC ada pter before starting to replace the needle. 1. Turn the hand wheel to raise the needle to its highest position. 2. Hold the old needle and loosen the needle clamp screw.
ACCESSORIES Foot Pedal AC/DC Adapter Bobbins (x2), Thread Spoo ls (x2), Need le, Needle Thre ader BATTERY INSTALLATION 1. Battery compartment is on the bottom of the sewing machine. 2. Open the cover of the battery compartment and insert the 4 “AA” alkaline batteries.
REPLACING THE BOBBIN Caution : When replacing or inserting the bobbin, make sure that the On/Off button is in the “Off” position. 1. Press the bobbin cover release button and remove the bobbin cover. 2. Insert the new bobbin into the compartment leaving a 3-inch tail.
SEWING 1. Turn the hand wheel to raise up the needle to the highest position. Lift the presser foot and place the fabric to be sewn under the presser foot. (Fig. 1) 2. Lower the presser foot. (Fig. 2) 3. Press the On/Off button to the “On” position and begin sewing.
An important point after buying a device Euro-Pro DRESSMAKER 1104HB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro DRESSMAKER 1104HB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro DRESSMAKER 1104HB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro DRESSMAKER 1104HB you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro DRESSMAKER 1104HB will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro DRESSMAKER 1104HB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro DRESSMAKER 1104HB.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro DRESSMAKER 1104HB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro DRESSMAKER 1104HB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
