Instruction/ maintenance manual of the product CRAFT IRON IR410 Euro-Pro
Go to page of 6
OWNER’S MANUAL Model IR410 Craft Iron For in formation or assistance: EURO-PRO Operating LLC 21 Lawrence Paquette Industria l Drive . Champlain, NY 12919 www.
Model IR410 LIMITED WARRANTY IMPORTANT SAFETY INSTRUCTIONS reassembly can cause the risk of electric shock when the iron is used. 8. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
TROUBLESHOOTING ADDITIONAL IMPORTANT SAFEGUARDS PROBLEM POSSIBLE REASONS & SOLUTIONS Iron does not heat Thermostat ready light goes On and Off Some odor or small particles come out of steam vents of new iron Iron does not steam Water droplets coming from steam vents • Iron should be plugged into a 120V AC electr ical outlet only.
GETTING TO KNOW YOUR IRON IRONING CHART Before using your Craft Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron. When turned on for the first time, your new iron may emit an odor for up to 10 minutes.
OPERATING INSTRUCTIONS USER MAINTENANCE INSTRUCTIONS STORAGE This appliance is for HOUSEHOLD USE ONLY and may be plugged into any 120V AC polarized electrical outlet. Do not use any other type of outlet. WARNING! Before filling the iron with water, be sure the iron is not plugged into the electrical out let.
OPERATING INSTRUCTIONS (CONT.) OPERATING INSTRUCTIONS (CONT.) 4. Turn the temperature dial to any of the temperatures within the gray steam band and allow the iron to heat for approximately 2 minutes before ironing. Place iron on its heel (on a stable, protected surface) while the iron is warming to desired temperature.
An important point after buying a device Euro-Pro CRAFT IRON IR410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro CRAFT IRON IR410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro CRAFT IRON IR410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro CRAFT IRON IR410 you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro CRAFT IRON IR410 will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro CRAFT IRON IR410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro CRAFT IRON IR410.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro CRAFT IRON IR410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro CRAFT IRON IR410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
