Instruction/ maintenance manual of the product 5180 Eureka
Go to page of 20
Index Important Safeguards ............. 2 General Information ................ 4 Thermal Cut Off ................ 4 & 7 Assemble ................................ 5 Use ....................................... 6-7 Accessories ......................
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivante s: LISEZ TOUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
HOW TO ASSEMBLE V ACUUM CLEANER HANDLE CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. STEP 1 Pull the foam pieces from the ends of the handle and throw away . STEP 2 Find the 2-part bolt in the plastic bag with the owner ’s guide.
NOTE: Never lift the cleaner by the control grip. Place the handle in the upright position before rolling the machine from room to room. The selector button must be locked into the manual position when the power switch is turned OFF or when rolling the machine.
HOW T O USE THE SELF-PROPELLED V ACUUM CLEANER (continued) How to Adjust the Cleaner Height Setting W ARNING: A void injury . Keep hair , loose clothing, fingers, and all parts of body away from openings and moving parts (such as the revolving brush roll and power drive wheel).
HOW TO USE THE ACCESSORIES NOTE: Do not place cleaner on furniture or steps as the brush roll or drive wheel may cause damage. Place cleaner on floor with the handle in storage position while using accessories. 1. Remove hose from rear of cleaner . 2.
9 Maintenance of Dirt Alert Feature (On some models) The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light beam, the red light comes on indicating additional cleaning is needed in this area.
HOW T O MAINT AIN The instructions in this booklet serve as a guide to routine maintenance. T o avoid unnecessary service calls, check the bag, belt, and brush roll often. Brush Roll The brush roll turns as it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues brushing the carpet.
How T o Replace Brush Roll Belt (continued) 1 1. Rotate the brush roll at least three revolutions to seat the drive belt. 12. Replace the hood onto the cleaner . Make sure the front of the hood is behind the furniture guard. 13. T ighten screws. 11 Use GENUINE EUREKA replacement belt, 54312.
12 HOW T O CLEAR HOSE CLOGS NOTE: T urn off the switch and unplug the electrical cord before clearing hose. 1. Remove the front bag cover . 2. Step on handle release. 3. Release the hose from the unit. See Detail 6. T o release the hose, grasp the hose adapter at depression and rotate to the left to release.
Bag Change Indicator (on selected models only) Some models feature a Bag Change Indicator to remind you to change the bag. The indicator on the bag cover moves into the window as the airflow through the bag decreases. Certain types of fine particles like powder , plaster dust, or fine road dust can restrict airflow very quickly .
How T o Replace Filters: Motor Filter Check the motor filter with each disposable dust bag change. Cleaning the motor filter is recommended between filter changes. T o Clean Motor Filter 1. Remove the front bag cover . 2. Remove filter from inside the bag compartment (lower left side).
15 How to Change Light Bulb (only for models with a headlight) NOTE: T urn off the power switch and disconnect the electrical cord before changing light bulb. 1. Lower handle to remove two screws from lens cover . 2. Lift lens cover from cleaner . 3. Push light bulb into socket; turn to release.
PROBLEM SOL VING NOTE: T urn off the switch and unplug the electrical cord before servicing. PROBLEM CAUSE SOLUTION Motor suddenly stops. Thermal Cut Off Refer to page 7. Does not clean the Hose Remove any clogs from the hose that restrict the carpet.
58236A 58623A 54926 39334 54776 54777A 60285 61120 58728A 14070-3 34691-8 26708-119N 60112 54781 54785 54002 60169-2 60252-1 48815 3.99 6.99 9.99 1.59 2.
.
19 THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year . The warranty is granted only to the original purchaser and members of his or her immediate household.
©1999 White Consolidated Industries, Inc. Printed in U.S.A. Part No. 59185C (4/00) Thank you for selecting a Eureka cleaner . 1 crevice tool Accessory Items in This Carton Questions? Do Not Return T o Store Call 1-800-282-2886 7 a.
An important point after buying a device Eureka 5180 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eureka 5180 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eureka 5180 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eureka 5180 you will learn all the available features of the product, as well as information on its operation. The information that you get Eureka 5180 will certainly help you make a decision on the purchase.
If you already are a holder of Eureka 5180, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eureka 5180.
However, one of the most important roles played by the user manual is to help in solving problems with Eureka 5180. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eureka 5180 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
