Instruction/ maintenance manual of the product 4650 Eureka
Go to page of 20
Upright V acuum Cleaner Owner ’ s Guide 4650 & 4680 Series Household T ype Index Important Safeguards ................. 2 Service Information ..................... 4 Assembly ................................. 5-6 Thermal Cut Off ................
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivante s: LISEZ TOUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
4 T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
5 HOW TO ASSEMBLE CAUTION: Assemble the cleaner before using. CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. NOTE: Features may vary by model yet all parts assemble the same. Step A Attach Handle CAUTION: Do not catch cord under handle.
6 Cord Hook Cord Hook Step D Store Electrical Cord Step C Store Hose and Accessories Combination T ool Crevice T ool Hook Hose Retainer T abs Extension W and or W ands Carrying Handle HEP A Filter (on some models) Optional Dusting Brush and Upholstery T ool can be stored in place of the combination tool on handle pegs.
Clean Under Use Handle Release 3 7 HOW T O USE The upright vacuum cleaner design allows use on multiple types of carpeting and on upholstery or bare floors with attachments. When using the attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.
8 How T o Use Accessories NOTE: Do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using accessories. Crevice T ool Upholstery Side . . . . . Combination tool gives two types of cleaning tools.
9 Maintenance of Dirt Alert Feature (On some models) The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light beam, the red light comes on indicating additional cleaning is needed in this area.
10 HOW TO MAINT AIN The instructions in this booklet serve as a guide to routine maintenance. T o avoid unnecessary service calls, check the cyclonic dust cup, belt, and brush roll often. Remove dust cup by pulling latch (1) forward, pivoting dust cup out and lifting up.
How T o Empty Dust Cup NOTE: T urn off the switch and unplug the electrical cord before emptying dust cup. Never operate the vacuum cleaner without the dust cup and filter assembly properly installed. Emptying the Dust Cup: FOR INSTRUCTIONS ON HOW T O REMOVE THE DUST CUP FROM THE CLEANER BODY , REFER TO P AGE 10.
12 5. Place new belt around motor shaft. 6. Place belt around brush roll pulley . 7. Align left end cap with base. Push end cap securely into place. 8. Pull right side of brush roll to stretch belt. Secure right end cap into base. 9. Rotate brush roll to seat belt.
13 How to Clear Hose Clogs NOTE: T urn off the switch and unplug the electrical cord before clearing hose. 1. Locate hose adapter on the front of the cleaner . 2. Push button on hose adapter and pull hose upward to release hose from top of cleaner . HOW T O MAINT AIN (continued) Hose Adapter 3.
14 Pre-Motor Filter Check the pre-motor filter each time the cyclonic dust cup is emptied. Clean or replace as needed. T o Clean Pre-Motor Filter 1 . Remove filter centered in the bottom of the dust cup compartment. 2. Shake filter to remove excess dust.
15 Use 15 watt replacement light bulb, part number 48815. How T o Change Light Bulb (Only for models with a headlight) NOTE: T urn off the power switch and disconnect the electrical cord before changing light bulb. 1. Lower handle. Remove two screws from lens cover .
Some models will come complete with an extra bonus hose which is ideal for cleaning stairs. HOW TO ASSEMBLE AND USE ST AIR CLEANING HOSE (Only on Certain Models) Step 3 - Y ou are ready to clean your stairs. Step 2 - Connect the hose cuff to the end of the bonus hose.
Motor will not start. Electric Plug Push plug securely into outlet. T ry another outlet. Check circuit breaker . Motor suddenly stops. Thermal Cut Off Refer to page 7. Does not clean the carpet Filters Clean or replace the filter(s). Hint: If picking up fine or floor .
THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year . The warranty is granted only to the original purchaser and members of his or her immediate household.
61120 60285B 61500 60801 61805 39348 58728B 13104-4 61037 27237-3 38284-3 54505-3 54785A 54002 61324-1 61224-1 60166 61308-2 60251-3 48815 61316-1 2.99 19.99 5.99 4.99 12.99 1.09 4.39 2.49 4.49 2.69 3.29 5.19 10.39 12.99 17.39 11.29 29.99 12.59 13.89 1.
©2000 White Consolidated Industries, Inc. Part No. 70938B (10/01) Printed in U.S.A. Thank you for selecting a Eureka cleaner . 1 wand 1 crevice tool 1 combination tool (on some models) 1 hose assembly 1 vacuum cleaner handle Accessory Items in This Carton 1 hardware package (2 screws) Questions? Do Not Return T o Store Call 1-800-282-2886 7 a.
An important point after buying a device Eureka 4650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eureka 4650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eureka 4650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eureka 4650 you will learn all the available features of the product, as well as information on its operation. The information that you get Eureka 4650 will certainly help you make a decision on the purchase.
If you already are a holder of Eureka 4650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eureka 4650.
However, one of the most important roles played by the user manual is to help in solving problems with Eureka 4650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eureka 4650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
