Instruction/ maintenance manual of the product D-07 Esoteric
Go to page of 16
D01090921B D-07 D/A Conv erter - Digital Pre-Amplifier O WN E R’ S MAN U AL .................... 3 MO DE D ’E MP L O I ....................... 15 MAN U AL DE L U S U ARI O .
2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation.
ENGLISH 3 “Super Audio CD” is a registered trademark. “DSD” is a registered trademark. Microsoft, Windows Media, Windows and Windows Vista are either registered tradem arks or trademar ks of M icrosoft Corpora tion in t he United States and/or other countries.
4 What’ s in the bo x Please confirm that the following accessories are in the box when you open it. Po wer cord x 1 Owner ’ s manual x 1 W arrant y card x 1 Read this before oper ation < Place the unit in a stable location near the audio system that you will use.
ENGLISH 5 Identifying the P ar ts A POWER Use this button to turn the unit on and off . The indicator ring lights when the unit is ON. B WORD Displays the current wor d sync or master clock status (see page 10). C MENU Pr ess to engage the setup mode (see page 8).
6 C onnec tion Connection Precautions: < Connect the power plug to a wall socket after completing all other connections. < Be sure to thoroughly r ead through the instruction manuals of the equipment you will connect and obser ve all instructions.
ENGLISH 7 A D igital audio input terminals (DIGIT AL IN) These terminals input digital audio. Connect these terminals to the corresponding terminals on a digital device (for example, Esoteric P-01, P -03 or P-05 etc .). Use commercially available cables f or the following connections: XLR: Use a balanced XLR digital audio cable.
8 1 Press the POWER button to turn the unit on. The indicator ring lights when the unit is on. < When connecting a power amplifier to the unit, make sure to turn it on after turning on other devices. < Also turn on all devices connected to the unit.
ENGLISH 9 3 Press the MENU button repeatedly until the display returns to normal to exit the setup mode . If you press the INPUT button or leave the unit idle for 10 seconds, the set-up mode will be cancelled. < Settings are stored even when power is turned off and the unit is unplugged.
10 Settings (2) MCK (Master clock) This set-up mode selects the word sync or master clock mode . A different setting can be made f or each input. < Make a connec tion to the W ORD SYNC ter minal before selecting W-IN or W-OUT . PLL1 (Word sync off , NORMAL mode) This setting does not use the word sync.
ENGLISH 11 OUT ( Analog output terminal) Sets the output terminal for analog audio output. RCA Analog audio outputs from the RCA terminals only . XLR2 Analog audio outputs from the XLR terminal only and is P in 2 HOT . XLR3 Analog audio outputs from the XLR terminal only and is P in 3 HOT .
12 < It is not possible to control this unit from the personal computer or control the personal computer fr om this unit. < It is not possible to send music files from this unit to a personal computer via USB. < CAUTION: When music files are being played through a USB connection, do not remove the USB cable.
ENGLISH 13 If the sound does not playback normally when you are using a supported operating system, and the connections are correct as described above, check the f ollowing points. F or Windo ws XP < Click “Control Panel” and then “Sound and Audio Devices P roperties” .
14 Messages “- - -” appears on the right side of the display . An incompatible signal is input. Do not input signals other than PCM. Check digital device connections. XLR, RCA, RCA2 or OPT flashes. The unit cannot detect a digital signal. Press the INPUT button to select a terminal to which a digital device is connected.
39 ESP AÑOL China RoHS < The information in the f ollowing table is only applicable to products for sale in the P eople’ s Republic of China. < The products sold in the European area are manufactured in ac cordance with the European RoHS Directive .
1209 MA-1539B This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your r ecords. Model number Serial number ESO TERIC COMP ANY 1-47 Ochiai, T ama-shi, T okyo 206-8530, Japan F ax: (042) 356-9240 e -mail: eso-os@tec.
An important point after buying a device Esoteric D-07 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Esoteric D-07 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Esoteric D-07 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Esoteric D-07 you will learn all the available features of the product, as well as information on its operation. The information that you get Esoteric D-07 will certainly help you make a decision on the purchase.
If you already are a holder of Esoteric D-07, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Esoteric D-07.
However, one of the most important roles played by the user manual is to help in solving problems with Esoteric D-07. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Esoteric D-07 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
