Instruction/ maintenance manual of the product 60-578 Ergotron
Go to page of 22
888-60-182P-01 rev .D • 01/07 1 of 22 WM Large Display Low Profi le Wall Mount Product Specifi cations W eight Capacity 79 kg (175 lbs) Mounting Options Verical Mount: W all plate attaches to vertical wall surfaces. Includes fasteners for w ood (16” or 24” centered studs) or concr ete wall mounting.
888-60-182P-01 rev .D • 01/07 2 of 22 AB C 1 2 3 4 5 PENTA SCREW TOOL PENTA WASHER A LOCKING SCREW WASHER B LONG SPACER A LONG SPACER B SHORT SPACER A SHORT SPACER B M4x20mm M4x40mm M5x20mm M5x40mm .
888-60-182P-01 rev .D • 01/07 3 of 22 Componen ts: • Display Brackets • Rail • F asteners CAUTION: A stable, safe installation depends on using the correct combination of fasteners, and while .
888-60-182P-01 rev .D • 01/07 4 of 22 MM MM MM MM a 1 b c v MM v MM Ø TOP ┵ 乊䚼.
888-60-182P-01 rev .D • 01/07 5 of 22 * If a stand is already attached to your display , remov e it according to display manufacturer directions. Place the display on a clean, fl at, padded surface or, if you prefer , lean the displ ay against a stable, vertical surface.
888-60-182P-01 rev .D • 01/07 6 of 22 MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM M.
888-60-182P-01 rev .D • 01/07 7 of 22 2 Compare this measur ement Compare this measurement to the recommended screw (based on display back type and diameter), tak ing into consideration the need for.
888-60-182P-01 rev .D • 01/07 8 of 22 4 MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM .
888-60-182P-01 rev .D • 01/07 9 of 22 4 A TT ACH BRA CKETS TO DISPLA Y a Place Display Brackets (with pre-de- termined fasteners) on back of display: (y) The display brackets should be centered vert.
888-60-182P-01 rev .D • 01/07 10 of 22 5 12 Ø 3/8" (10 mm) Ø 3/16" (5 mm) 14 WOOD ᧁ 䋼 CONCRETE ࠦࡦࠢ࠻ ∈⊹䋼 Mounting to structures other than those specifi ed has not been ev aluated by UL. ᒰขᛒ⺑ᦠߢᜰቯߐࠇߚ᭴ㅧ‛એᄖ߳ߩขࠅઃߌ ߪޔ7.
888-60-182P-01 rev .D • 01/07 11 of 22 5 W ALL PL A TE MOUNTING INSTRUCTIONS Ergotron provides fast eners for mount- ing the Wall Mount to the f ollowing wall confi gurations: • Wall Type I - Solid W ood Studs (2”x4”) 16” or 24” (406mm / 610mm) on center .
888-60-182P-01 rev .D • 01/07 12 of 22 a c d Ø 3/16" (5 mm) 16 6 b WOOD ᧁ 䋼.
888-60-182P-01 rev .D • 01/07 13 of 22 6 A TT ACH RAIL T O W ALL Solid W ood Studs W ARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment.
888-60-182P-01 rev .D • 01/07 14 of 22 b c 3-1/8" (80 mm) Ø 3/8" (10 mm) 6 2x d a 16 CONCRETE ࠦࡦࠢ࠻ ∈⊹䋼.
888-60-182P-01 rev .D • 01/07 15 of 22 6 A TT ACH RAIL T O W ALL Solid Concrete * Before proceeding with this installation, consult the manufac- turer of your display for recommen- dations on choosing a mounting location that will ensure optimum performance.
888-60-182P-01 rev .D • 01/07 16 of 22 7 4x 4x a b.
888-60-182P-01 rev .D • 01/07 17 of 22 7 a Hold Rail against wall and star t screws with washers. b Tighten screws with 13mm socket head (power tool is rec ommended) in the following sequence: 1st-lower right; 2nd-upper left; 3rd-lower left; 4th-upper right.
888-60-182P-01 rev .D • 01/07 18 of 22 8 a b Cen ter of Display Loca ted Over Cent er of Stud - ALL OWED ࠺ࠖࠬࡊࠗߩਛᔃ߇ࠬ࠲࠶࠼ߩਛᔃߦ㊀ߥߞߡࠆน .
888-60-182P-01 rev .D • 01/07 19 of 22 8 HANG DISPLA Y ON RAIL a Hang the display on the rail, positioning it so that the center of the display is aligned between the studs (indicated by tape strips).
888-60-182P-01 rev .D • 01/07 20 of 22 9 LOCKING SCREW 2x SECURITY SCREW 2x ab 9 At the bottom of each of the display brackets, install and tighten either a Security Screws with Pentagon too.
888-60-182P-01 rev .D • 01/07 21 of 22.
888-60-182P-01 rev .D • 01/07 22 of 22.
An important point after buying a device Ergotron 60-578 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ergotron 60-578 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ergotron 60-578 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ergotron 60-578 you will learn all the available features of the product, as well as information on its operation. The information that you get Ergotron 60-578 will certainly help you make a decision on the purchase.
If you already are a holder of Ergotron 60-578, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ergotron 60-578.
However, one of the most important roles played by the user manual is to help in solving problems with Ergotron 60-578. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ergotron 60-578 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
