Instruction/ maintenance manual of the product USB 2.0 Frontpanel 3.5" Equip
Go to page of 29
www .equip-info.net USB 2.0 Frontpanel 3.5 english Manual.
www .equip-info.net Index 1.0 T rademarks 3 2.0 Introductions 3 3.0 Package contents 3 4.0 Hardware Requirements 3 5.0 System Support 3 6.0 How to install your Card Reader to drive bay 4 7.0 Pin assignment of USB Cable 5 8.0 Driver installations 7 8.1 Windows 98 driver installation 7 8.
www .equip-info.net 1.0 T rademarks All names and products mentioned below are registered trademarks of their respective companies. 2.0 Introductions The advantage of 3.5 USB2.0 internal Multi I/O Card Reader is to provide a better solution to read or write files for variety of memory cards.
www .equip-info.net 6.0 How to Install Y our Card Reader to drive Bay 1. T urn your computer off and disconnect the power cord. 2. Remove the cover of your computer . (Refer to your computer s hardware reference manual and follow the instructions to removing the cover) 3.
www .equip-info.net 7.0 Pin assignment of USB Cable Dual USB cable pin assignment Single-row USB cable pin assignment This mark identify as the pin1 of USB cable end connector www .
www .equip-info.net www .equip-info.net IEEE1394 cable pin assignment Manual_ Page 6.
www .equip-info.net www .equip-info.net 8.0 Driver Installation The card reader need to install application driver for showing media icon on your Windows, you can find the software program in bundle disk and follow next steps to complete the driver installation.
www .equip-info.net www .equip-info.net 3. Click Browse to specify the driver location. 4. Insert your driver disc into the CD-ROM drive and path to DriverWin98, Click OK to next.
www .equip-info.net www .equip-info.net 6. Click Next button to continue. 7. Click Finish button to complete driver installation. 8. Windows will detect reader and display four Removable Disk icons in My Computer , now you can insert your memory card for application.
www .equip-info.net www .equip-info.net Windows® 98SE driver installation 1. T urn on your computer , Windows will detect the addition of new hardware and display the following message. Click Cancel button to close this windows. 2. Insert your driver disc into the CD-ROM drive and path to Driver, double click setup icon.
www .equip-info.net www .equip-info.net 3. Click Next button to continue. 4. Click Next button to continue. Manual_ Page 11.
www .equip-info.net www .equip-info.net 5. Click Next button to continue. 6. Click Next button to continue. Manual_ Page 12.
www .equip-info.net 7. This window shows you that driver has completely installed. Y ou need to restart your computer , Click Finish button. 8. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application.
www .equip-info.net Windows® ME driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 15.
www .equip-info.net 8. Click Next button to continue. 9. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button.
www .equip-info.net 10. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application. If you have any problem of using media card, please refer to the next How to use your media memory card section.
www .equip-info.net Windows® 2000 driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 19.
www .equip-info.net 8. Click Next button to continue. 9. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button.
www .equip-info.net 10. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application. If you have any problem of using media card, please refer to the next How to use your media memory card section.
www .equip-info.net Windows® XP driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 23.
www .equip-info.net 8. Click Next button to continue. 9. Click Next button to continue. www .equip-info.net Manual_ Page 24.
www .equip-info.net 10. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button. 11. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application.
www .equip-info.net 9.0 How to use your media memory cards This internal card reader provides two slots for over ten most popular memory cards application. Left slot is for bozh CF and Micro drive, right side is 4 in 1 slot for SD/MMC/MS/SMC media cards.
www .equip-info.net 10.0 How to format your memory card Y ou can format the memory card like as format remove disk, but in some memory card such as memory stick and SD card, you must be sure the write protected switch is disable. 11.0 Indicator Description The card reader provides a R/W (read/write) status indicator for card slot diagnosis.
www .equip-info.net 12.0 Booting from CF memory This reader can boot from CF slot like as Floppy disk drive, but your system BIOS must support and has changed to booting from USB device setting, otherwise you can´t boot from this reader .
www .equip-info.net 13.0 How to swap your front bezel If you want to change bezel to different color , find a stylus or pin-like tool to press the plastic-clip in both sides and take off the front bezel.
An important point after buying a device Equip USB 2.0 Frontpanel 3.5" (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Equip USB 2.0 Frontpanel 3.5" yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Equip USB 2.0 Frontpanel 3.5" - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Equip USB 2.0 Frontpanel 3.5" you will learn all the available features of the product, as well as information on its operation. The information that you get Equip USB 2.0 Frontpanel 3.5" will certainly help you make a decision on the purchase.
If you already are a holder of Equip USB 2.0 Frontpanel 3.5", but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Equip USB 2.0 Frontpanel 3.5".
However, one of the most important roles played by the user manual is to help in solving problems with Equip USB 2.0 Frontpanel 3.5". Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Equip USB 2.0 Frontpanel 3.5" along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
