Instruction/ maintenance manual of the product RP-300-H Epson
Go to page of 31
RP-30 0 - H Receipt Printer User ’ s Manua l All specifications are subject to change without notice.
.
T ABLE OF CONTENTS 1. Parts Identifications 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting the cables 5 2.3 Loading the roll paper 9 2.4 Dip switch setting 11 3. Control panel and other functions 18 3.1 Control panel 18 3.2 Error Indicating 18 4.
RP-300-H User ’ s Manual 3 1. Parts Identifications.
RP-300-H User ’ s Manual 4 2. Setting Up the Printer 2-1. Unpacking Y our printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance.
RP-300-H User ’ s Manual 5 2-2. Connecting the Cables Y ou can connect up the cables required for printing to the printer . They all connect to the connector panel on the back of the printer , which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are turned off.
RP-300-H User ’ s Manual 6 2-2-1. Interface Connector - Serial interface PIN SIGNAL I/O DESCRIPTION 2 TxD Output Printer transmit data line RS-232C level 3 RxD Input Printer receive data line RS-232.
RP-300-H User ’ s Manual 7 - Centronics Parallel interface PIN SIGNAL I/O DESCRIPTION 1 STROBE- Input Synchronize signal Data received 2~9 DA T A0~7 Input/Output Data bit T ransmitted 0 ~7 10 ACK- Output Data receiving completed.
RP-300-H User ’ s Manual 8 2-2-2. Cash Drawer Connector The printer can operate two cash drawers with a 6 pin RJ-1 1 modular connector . The driver is capable of supplying a maximum current of 1.
RP-300-H User ’ s Manual 9 2-3. Loading the Roll Paper Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly . (T urn off power switch) 1.
RP-300-H User ’ s Manual 10 5. Be sure to note the correct direction that the paper comes off the roll. 6. Pull out a small amount of paper , as shown.
RP-300-H User ’ s Manual 1 1 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and parity check, as well as print density .
RP-300-H User ’ s Manual 12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Functions SW FUNCTIONS ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW -1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-3.
RP-300-H User ’ s Manual 13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW -1 SW.
RP-300-H User ’ s Manual 14 2-4-5. Wi-fi Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW -1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-6.
RP-300-H User ’ s Manual 15 DIP Switch Set 2 Functions Cutter SW FUNCTIONS ON OFF Remarks 3 Cutter FULL CUT P ARTIAL CUT Only Epson mode Emulation FUNCTIONS SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTIONS ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper Low] is an option.
RP-300-H User ’ s Manual 16 ♣CAUTION: T urn off the printer while removing the DIP switch cover to prevent an electric short, which can damage the printer . 1. Make sure the printer is turned off. 2. Remove the screw from the DIP switch cover . Then, take off the DIP switch cover as shown in the illustration below .
RP-300-H User ’ s Manual 17 ♣CAUTION: When the paper is jammed with cutter , the top cover might be stuck. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming.
RP-300-H User ’ s Manual 18 3. Control panel and other functions. 3-1. Control panel Y ou can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights help you to monitor the printer ’ s status.
RP-300-H User ’ s Manual 19 4. Self T est The self-test lets you know if your printer is operating properly . It checks the control circuits, printer mechanisms, print quality , ROM version and DIP switch settings. This test is independent of any other equipment or software.
RP-300-H User ’ s Manual 20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer . This can be useful in finding software problems.
RP-300-H User ’ s Manual 21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (3) Dot density 180DPI(Hor/V er) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180DPI Max 72mm (512dots) (5) Number of print columns.
RP-300-H User ’ s Manual 22.
RP-300-H User ’ s Manual 23 6-2. Auto Cutter Specifications (1) Cutting Frequency Max. 30 cuts per minute (2) Thickness of paper 0.06 ~ 0.09 mm (3) Cutter Life 1.
RP-300-H User ’ s Manual 24 ♠Important! When connecting or disconnecting the power supply from the printer , be sure that the following cautions are observed. (1) Use a power supply (Limited Power Supply) of DC 24V � 10% and more than 2.5A. (2) Be careful about installin gthe printer in an area where there is noise.
RP-300-H User ’ s Manual 25 7. Command List No. Command Function REMARKS 1 HT Horizontal tab 2 LF Print and line feed 3 CR Print and carriage return 4 FF Print and return to standard mode(in page mo.
RP-300-H User ’ s Manual 26 No. Command Function REMARKS 39 ESC p General pulse 40 ESC t Select character code table 41 ESC { T urn upside-down printing mode on/off 42 FS p Print NV bit image 43 FS .
RP-300-H User ’ s Manual 27.
RP-300-H User ’ s Manual 28 ♣ 注 意 事項 : 在 移 除 DIP switch 蓋 子 前 , 須 先 將 printer 電 源 關 掉 , 以 免 發 生 短路 導致 printer 燒 毀 . 1. 先 確 認 printer 電 源 確 實 關 閉 2. 移 除 DIP switch 蓋 子 上 之 螺 絲 , 再 將 蓋子 打開 , 如 圖 示 3.
RP-300-H User ’ s Manual 29 ♣ 注 意 事項 : 當 列 印 紙 切 割 跳 脫 或 卡住 時, 可 能 是 被 上 端 蓋 子 卡 住 . 在 此 種 狀 況 下 , 請 重 複 將 電 源 開 關 數 次 . 如 果 故 障 仍 無 法 排 除 ,請 依循 以 下 步 驟 排 除 故 障 1 .
Rev . 1. 0.
An important point after buying a device Epson RP-300-H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson RP-300-H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson RP-300-H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson RP-300-H you will learn all the available features of the product, as well as information on its operation. The information that you get Epson RP-300-H will certainly help you make a decision on the purchase.
If you already are a holder of Epson RP-300-H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson RP-300-H.
However, one of the most important roles played by the user manual is to help in solving problems with Epson RP-300-H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson RP-300-H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
