Instruction/ maintenance manual of the product PRP-080 Epson
Go to page of 19
PRP-080 Series THERMAL RECEIPT PRINTER User's Manual Specifications subjects to change without notice.
-1- Contents 1. General Information 2. Quick Start 3. Printer Interface and Connection 4. Configuration 5. Safety and Maintenance 6. Appendix 1.1) Main Features...................................................................... 2 1.2) PRP-080I (Standard) & PRP-080II (Advanced) Function Comparison 2.
1. General Information Models 1.1) Main Features Note: International font can be combined with others, for example PRP-080I-BI-MS, standard, Big5+International, beige, serial 160 (for PRP-080II)~220 (for PRP-080I) mm/s maximum print speed. Low-noise thermal printing.
1. General Information Models 1.1) Main Features Note: International font can be combined with others, for example PRP-080I-BI-MS, standard, Big5+International, beige, serial 160 (for PRP-080II)~220 (for PRP-080I) mm/s maximum print speed. Low-noise thermal printing.
2. Quick Start 2.1) Unpacking & Parts Identification a. Unpacking: B. Parts Identification: -5- -4- Printer cover Open this cover to load or replace paper . Control panel Features LED indicators to indicate printer status and buttons to operate the printer .
c. While observing the direction of the roll, set the paper roll into the hollow , and pull on the leading edge of the paper toward you as shown: d. Close the cover: When closing the cover , press the center of printer cover firmly to prevent paper miss-loading -7- -6- e.
3. Printer Interface and Connection 3.1) Connecting the Interface Cable 3.2) Connecting to a Cash Drawer a. Before connecting/disconnecting the interface cable, make sure that power to the printer and all the devices connected to the printer is turned off.
(Blue LED) The POWER light is on whenever the printer is on. (Red LED) This indicates printer online/offline status or an error (Button) Press the FEED button to feed roll paper . (Button) Press the ONLINE button to set printer ONLINE/OFFLINE 4. Configuration Printer Control Panel & Status Indication 4.
4.3) Printer Self T est 4.4) Driver Installation This is to test whether the printer is working properly or not and also checks the printing quality , firmware version, and DIP switch settings 1. Hold the ONLINE (*) button first and then turn on the power at the same time, release the button after around 1 second.
5. Safety and Maintenance 5.1) Safety Information 5.2) Periodical Cleaning 5.3) Preventing Paper Jams 1. Do not touch the HEAD of printer with anything. 2. Do not touch the cutter blade. 3. Only use the power supply that is come along with the printer .
6. Appendix 1. Pr oduct Specifications 1.1) Printing Specifications 1.2) Auto Cutter 1.3) Paper Roll Supply Device 1. Printing method: Thermal line printing 2. Dot density: 203 dpi 203 dpi. 3. Printing direction: Unidirectional with friction feed 4. Printing width: 72 mm (2.
1.7) Reliability 1.8) Environmental Conditions 1.9) Installation 1. Life Span: Mechanism: 15,000,000 lines Thermal head: 100 million pulses, 100 Km Auto cutter: 1,500,000 cuts (End of life span is defined to have reached the end of its life when it reaches the beginning of the W ear out Period.
1.nterface connector terminal assignments and signal functions Pin number Signal name Signal Source Description 2 TXD Printer When using XON/XOFF handshake protocol, printer transmits control code XON.
-23- -22- 3. Drawer kick-out drive signal Output signal: Output voltage: Approximately 24 V Output current: 1A or less 2.2) Connectors a. Interface Connectors b.
General Printer Commands Command Lists: -25- -24- Command Code Description Function Description (Hex) HT 09 Horizontal tab LF 0A Print and line feed CR 0D Print and carriage return E S C$n L n H 1 B2 .
PRP-080I & II COMMANDS COMP ARISON Command Name PRP-080I PRP-080II (Standard) (Advanced) HT Horizontal tab * * LF Print and line feed * * FF Print and return to standard * mode in page mode CR Pri.
Note: Commands for International Fonts E S CRn Select an International Character Set Format ASC ESC R n Hex 1B 52 n Decimal 27 82 n Range 0 n 13 Description Selects an international character set n from the following table: N Character set 0 U.S.A. 1 Franch 2 Germany 3 U.
Character code can also be selected by utility pr ogram. 1. T o install the PRP-080 Default Code Page Setting utility , please insert the bundled CD disk into the CD-ROM drive. 2. In the CD-Rom menu, please go to Receipt Printer > PRP-080 > Code Page and double click the setup.
Optional multilingual character model supports printing with one of the following characters: T o enable/disable the multilingual character code use the following commands: (*) a. B - T raditional Chinese (Big 5) b. G - Simplify Chinese (GB) c. K - Korean d.
An important point after buying a device Epson PRP-080 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson PRP-080 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson PRP-080 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson PRP-080 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson PRP-080 will certainly help you make a decision on the purchase.
If you already are a holder of Epson PRP-080, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson PRP-080.
However, one of the most important roles played by the user manual is to help in solving problems with Epson PRP-080. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson PRP-080 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
