Instruction/ maintenance manual of the product Pro 7900 CTP Epson
Go to page of 12
Epson Stylus ® Pro 7900CTP Large Plate Accessory Kit User’s Guide.
2 | Introduction Introduction The Large Plate Accessory Kit enables the Epson Stylus ® Pro 7900CTP Computer to Plate System to print and cure large aluminum plates. The kit contains a large pl ate guide for the printer and a tray extension for the plate curing unit (PCU).
Installing the Large Plate Guide on the Printer | 3 Installing the Large Plate Guide on the Printer To ensure proper registration when printing on Epso n DirectPlate Aluminum plates, you need to install the large plate guide on the printer . 1. Open the roll paper cover on the printer.
4 | Aligning the Large Plate Guide 6. Gently press the top of the guide on both sides to secure it into position. Aligning the Large Plate Guide The large plate guide must be correctly aligned to prevent any sk ew when printing on the plate. 1. Press the l Paper Source button until the Sheet icon appears on the LCD screen.
Aligning the Large Plate Guide | 5 3. Use a metric ruler to measure the distance from the left edge of the plate to point A on the printed plate. Then measure the distance from th e left edge of the plate to point B. If the distances to points A and B are equal, go to step 6.
6 | Aligning the Large Plate Guide 4. Using the included hexagonal wrench, adjust the alignment of the plate guide. If distance A is greater than distance B, tighten the alignment screw; if distance B is greater than distance A, loosen the scre w. Half a rotation of the screw moves the guid e approximately 1.
Loading a Plate in the Printer | 7 Loading a Plate in the Printer Caution: Use only Epson DirectPlate Aluminum plates. Examine each plate carefully before you us e it. If the plate is dented or the co rners or edges are bent, do not us e it. Even the slightest be nt corner can damage the printer.
8 | Loading a Plate in the Printer 4. Press the Paper release (ePlate n) button to disengage the feed er rollers. 5. Set the printer to the highest paper suction setting.
Unloading a Plate from the Printer | 9 8. Press the Pause/reset button and let go of the plat e. The printer loads and aligns the plate in the correct position. If the plate was not in correct position (either too high or too low) in step 6, you get a loading error message.
10 | Attaching the PCU Tray Extension Attaching the PCU Tray Extension The extension attaches to the larger tray supplied with the PCU; the tray should be used as the input tray. Note: The extension adds a sm all incline for the plate to travel into the oven.
Where to Get Help | 11 You can now slide the extension in and out to match your plate size. 3. Attach the tray to the PCU by inserting the tab into th e slot on the input side of the PCU. Press the tray down to make sure the tab is completely locked into the PCU.
. Notices Copyright Notice All rights reserved . No part of this publicatio n may be repr oduc ed, stored in a retrieval system, or transmitted in any fo rm or by any means, electronic, mechanica l, photocopying, re cording, or otherwise, without the prior written permission of Seiko Epson Corporation.
An important point after buying a device Epson Pro 7900 CTP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson Pro 7900 CTP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson Pro 7900 CTP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson Pro 7900 CTP you will learn all the available features of the product, as well as information on its operation. The information that you get Epson Pro 7900 CTP will certainly help you make a decision on the purchase.
If you already are a holder of Epson Pro 7900 CTP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson Pro 7900 CTP.
However, one of the most important roles played by the user manual is to help in solving problems with Epson Pro 7900 CTP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson Pro 7900 CTP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
