Instruction/ maintenance manual of the product ELPLL02 Epson
Go to page of 31
9 User ’ s Man ual f or ELPLL02 Long-Focal Length Zoom Lens • This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance.
10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted).
11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage .
12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.
13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat.
15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 68.3 to 1 16.2 mm 2. Zoom ratio 1.7 x 3. f number 2.14 to 2.98 4. Projection size 60 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.
9 User ’ s Manual f or Long Thr ow Zoom Lens ELPLL03 • This long throw zoom lens is designed for use only with EPSON multi- media projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance.
10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to screw the Long thro w zoom lens and adapter ring down completely . Unless the y are securely scre wed on, they could f all off and cause damage or injur y (es- pecially when the projector is ceiling-mounted).
11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage .
12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.
13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat.
15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 144.1 to 194.5mm 2. Zoom ratio 1.35 x 3. f number 2.60 to 3.27 4. Projection size 80 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.
11 User ’ s Manual f or ELPLR01 Rear Projector wide Lens • This wide-angle lens is designed for use only on EPSON multimedia projectors. • This lens is designed for use only on rear projection and rear projection box systems. • Please read this manual completely before use to assure maximum per - formance.
12 1. Bef ore mounting the wide-angle lens 1-1 Safety precautions W arning Be sure to scre w the Rear Projector wide lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted).
13 2. Mounting the rear -pr ojection wide-angle lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust.
14 Rear lens cap (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear -pr ojection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap.
15 (2) Adjusting the wide lens f or a rear projector • This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. T urn the lens shift button to move the lens all the way down. 2. Loosen the 2 focus ring mounting screws by using the hex wrench that came in the same package.
16 (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 16 Adobe PageMaker 6.
18 4. Rear -pr ojection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 27mm 2. f number 2.3 3. Projection size 60 to 100 inches 4. Mass 1600 g 4-2 Appearance with rear pr ojector wide lens mounted About 455mm 02_RPWL_DTP_E.pm6 01.
9 User ’ s Man ual f or ELPLS01 Standar d Lens • This standard lens is designed for use only with EPSON multimedia pro- jectors. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer slightly from your actual product.
10 1. Bef ore mounting the standard lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted).
11 2. Mounting the standar d lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage .
12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standar d lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws.
13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat.
15 4. Standar d lens specifications 4-1 Lens specifications 1. Focal length 49.2 to 68.9 mm 2. Zoom ratio 1.4 x 3. f number 1.84 to 2.36 4. Projection size 30 to 300 inches 5. Mass 1300 g 4-2 Appearance with standar d lens mounted About 475mm 02_SL_DTP_E.
9 User's Manual f or the ELPL W01 Wide Zoom Lens • This wide zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to decrease the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance.
10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted).
11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage .
12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.
13 (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo • Be sure to remov e the front lens cap be- f ore tur ning on the po wer , or it ma y melt from the heat.
15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 37.9 to 45.5 mm 2. Zoom ratio 1.2 x 3. f number 2.34 to 2.65 4. Projection size 60 to 200 inches 5. Mass 2600 g 4-2 Appearance with zoom lens mounted About 480mm 02_STZL_DTP_E.pm6 01.
An important point after buying a device Epson ELPLL02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson ELPLL02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson ELPLL02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson ELPLL02 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson ELPLL02 will certainly help you make a decision on the purchase.
If you already are a holder of Epson ELPLL02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson ELPLL02.
However, one of the most important roles played by the user manual is to help in solving problems with Epson ELPLL02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson ELPLL02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
