Instruction/ maintenance manual of the product EB120 Allard
Go to page of 12
EB120 Advanced Ethanol Boiler 1 EB120 Advanced Ethanol Boiler Allard Research and Development Copyright © 2008 – Allard Research and Development, LLC.
EB120 Advanced Ethanol Boiler 2 FOREWORD Thank you for purchasing the Allard Research and Development EB120 – Advanced Ethanol Boiler . Please take the time to read these instructions before you begin as they contain important information about the installation and maintenance requirements, as well as safety instructions.
EB120 Advanced Ethanol Boiler 3 Chapter One : Specifications Model Power (kw) V oltage (V) Phase (N~) Current (A) Dimensions ( W× W × H) EB-120 12.0 230/400 1/3 52.
EB120 Advanced Ethanol Boiler 4 6 Heat element Heat element 7 Proportional Solenoid Automatically controls the cooling water flow 8 Cooling W ater Out Output that connects to the Still cooling water i.
EB120 Advanced Ethanol Boiler 5 3 Drain Control Operates Drain, and used to set Cooling W ater Flow Rate 4 Set Preset Run T ime and Distillation Control T emperature 5 △ Increase button 6 ▽ Decrease button 7 C/F & Enter Enter Key .
EB120 Advanced Ethanol Boiler 6 Beer, Water, and Steam connections a. The water supply pipe and steam pipe should comply with local standards. b. Connect the cooling water inlet of the EB120 to the main water supply using a flexible hose with 3/4-inch fittings.
EB120 Advanced Ethanol Boiler 7 EB120 T emperature Probe Installations of power supply and control cables 1. Confirm the correct voltage of power supply and wires.
EB120 Advanced Ethanol Boiler 8 EB120 Circuit Board Chapter Four : T esting and operation (1) Once the installation has been completed and checked, turn on power and water supplies and carry out the following test.
EB120 Advanced Ethanol Boiler 9 drain valve opens (drain indicator LED green). (9) Y ou can also drain the boiler manually by pressing the drain key when the system has stopped heating. The drain indicator LED will indicate as red during this operation.
EB120 Advanced Ethanol Boiler 10 The water flow control can be fine tuned to help tightly control the specific characteristics of your particular still, and can help regulate varying input water pressures. There are four different presets that can be chosen for use during operation.
EB120 Advanced Ethanol Boiler 11 control panel is normal, and indicator LED for heating is on, but there is no steam output 1. Main circuit board 2. Relay circuit board 3.
EB120 Advanced Ethanol Boiler 12 kettles from most hardware stores, brew supply stores, and are available online from Allard Research and Development. Follow the instructions supplied with the crystals and allow sufficient time for the solution to dissolve the scale before flushing out the boiler.
An important point after buying a device Allard EB120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allard EB120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allard EB120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allard EB120 you will learn all the available features of the product, as well as information on its operation. The information that you get Allard EB120 will certainly help you make a decision on the purchase.
If you already are a holder of Allard EB120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allard EB120.
However, one of the most important roles played by the user manual is to help in solving problems with Allard EB120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allard EB120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
