Instruction/ maintenance manual of the product GSM0110 Enfora
Go to page of 44
User Guide: GSM0110UG001 Enfora GSM0110 Compact Flash Card Users Guide Revision 1.01.
Copyright Statement Copyright 2004 by Enfora, Inc. All rights reserve d. No portion of this document may be copied, photocopied, reproduced, transmitted, transcribed, stor ed in a retrieval system or .
Safety Informat ion for Wireless Handheld De vices FCC RF EXPOSURE INFORMATION WARNING! Read this informatio n before using your wireless device. In August 1986 the Federal Communications Comm ission .
Safety Instructions • Use of radio equipment is prohibited in hos pitals and may interfere with the use of medical equipment. Do NOT use the GSM0110 Compact Flash Card in hospitals. • FCC regulations prohibit using your wireless device during any air flight.
General Safety Instructions • Check if all peripherals are properly conn ected before turning on any equipm ent. • Make sure to disconnect the power plug fro m the power source before installing or removing peripherals. • Always hold the product with dry hands.
TABLE OF CONTENTS Copyright Statement ........................................................................................................... ii Disclaimer ...........................................................................................
Overview Welcome! Thank you for purchasing the GSM0110 Compact Flash Card! Welcome to the world of wireless data. Your GSM0110 Compact Flash Card is a compact, wireless data modem that uses th e GPRS (General Packet Radio Services ) wireless communication system, allowing you to transfer data on the go.
Revision History Date Rev Author Description 8/24/05 1.00 C. French Initial Release 09/08/06 1.01 D. O’Neil Removed reference to optional battery Package Contents Check the contents of the package. The follo wing items should be included. If there is any item that is damaged or m issing, pl ease contact your dealer immediately.
Appearance The GSM0110 Compact Flash Card On/Off Button SIM Holder CF Connector Antenna: Shown in the operating position Headset Jack Status LED GSM0110UG001 Page 3.
Network Status (Link) LED Description LED Color LED Status Connection Status Green Continuous Blinking Searching for Network Green Single Blink Connected to GSM Network Green Double Blink Transmitting.
To remove the SIM Card: Gently lift up on the notched corner side of the SIM. Push the SIM out of the holder. Installing the CF Card into the PDA To install into a PDA: 1. Locate the Compact Flash slot on your PDA. Note: If your PDA has a PCMCIA slot, in sert the CF card into the PCMCIA adaptor (included) before inser ting the CF card into the PDA.
To remove from the Laptop: Follow your laptop and operating system instruc tions for the steps required to remove a PCMCIA device. Note: Some operating systems m ay require you to stop certain services, such as the PCMCIA service, prior to phys ically removing the CF card.
Pocket PhoneTools Installing pocket Phon eTools for Pocket PC The software for pocket PhoneTools is loca ted on the CD-ROM labeled BVRP pocket PhoneTools.
5. Select your Install Language . 6. The pocket PhoneTools Install Wizard will appear. 7. Select Next to continue. 8. Read the License Agreement. Select Yes if you agree with the terms of the license agreement. 9. Specify a destination folder for pocket PhoneTools or accept the default folder.
10. Select Next. 11. Setup will now install the software. Select Cancel if you wis h to stop the installation process. 12. pocket PhoneTools will connect with your PDA and then copy the files to your PDA.
13. Select Yes to install the BVRP Soft ware pocket PhoneTools to the default directory. 14. The install progress will be displayed on the PC screen. 15. When the installation is complete you will be p ro mpted to check your PDA. Check to see if there are any additional steps to be performed on your PDA to complete the installation.
GSM0110UG001 Page 11.
Running pocket PhoneTools Note: Install your CF card now, if you have not done so already. 1. Select pock et PhoneTools i con from the Programs wi ndow. 2. You will need to configure your Network Operator. Select Yes to configure your N etwork Operator.
5. Select Yes to save your set tings. 6. The main pocket PhoneTools menu will appear. Note: To create an Internet Connection see the section entitled Creating a GPRS Connection .
pocket PhoneTools Functions Inbox Items Outbox Items Sent Messages Phonebook Create SMS Retrieve SMS Add phonebook entry Internet Connection Hide Toolbar Dialer Menu Messages Displayed Sort Items GSM0.
Dialer Menu Selecting the Dialer Icon from the main m enu will launch the Dialer . To have the Dialer load when pocke t PhoneTools starts select Tools>Settings>Dialer and Select On when loaded .
Place a Call End a Call Battery Status of PDA Connections Status Speaker On/Off Microphone On/Off Volume control Contacts Main Contact List Phone Logs Clear N umbe r GSM0110UG001 Page 16.
Creating a GPRS Connection Note: Selecting any Internet (Globe) Icon inside of pocket PhoneTools will launch the Internet Connection Wizar d if no connection already exists. To create a new GPRS connection on your PDA, follow these steps: 1. In the poc ket PhoneTools Taskbar Select Tools (1) then Settings (2).
7. Select GPRS connection. If you are u sing the default APN leave Use Standard Settings checked and proceed to step 13. If you are using a unique AP N or St at ic IP or DNS , uncheck Use St andard settings . See the FAQ section for more information about APNs.
8. The default APN for the carrier will be listed. Check the dro p dow n box for any other avail able APN’s. If you have a different APN from your ca rrier enter it into the text field. If a user name and password are r equired, enter the informat ion provided by y our carrier.
13. Select No . Check with your network operator to see if they support CSD calls. Note: CSD calls may incur additional charges with your carrier. See the FAQ section for more information on CSD calls. 12. Select Next . 14. Select OK to return to the General Setup window.
GSM0110UG001 Page 21 16. Select the Globe Icon t o start your Internet Connection. Start / Stop Internet Connection 17. Connection status will be displayed in the Task Bar.
Mobile PhoneTools – Using the Enfo ra CF Card on Your Laptop The following instructions will exp lain how to install and configure the Enf ora CF Card for use in a laptop computer. All of the in structions and references to a “menu” are specific to the mobile PhoneTools softwa re (not your Operating System).
3. Click on mobile PhoneTools So ftware Installation . 4. Click on the Language Version of mobile PhoneTools that you need. 5. You will see the following InstallShield Wiz ard screen: 6.
7. You will see the following License Agreemen t screen: 8. Click on Yes to continue. You will see the following screen : 9. Click on the radio button marked Complete.
11. Once the installation is complete, yo u will see the following screen which prompts you to configure a Persistent Connection. GSM0110UG001 Page 25.
The Persistent Connection Features are: 1) Start mobile PhoneTools on boot, and 2) Automatic Internet Connection (con nection automatically reconnects if dropped). During this step of the setup proc ess you can choose whether or not you would like to install Persis tent Connection Features.
To disable or enable the above features after installation, clic k on the menu from mobile PhoneTools, then click on Settings , then the Miscellaneous Tab . 14. Select the Persistent Connection Feature(s) you would like to enable. 15. Click Next to continue.
16. Click Finish . 17. Once the mobile PhoneTools is successf ully ins talled on your computer, you will see this icon on your desktop: If you installed Persistent Connecti on Features, m obile PhoneTools will automatically launch and you will proceed to Step 18.
20. You are now ready to begin using your Enfora CF Card. GSM0110UG001 Page 29.
Manual Modem Installation The following instructions appl y if you choose not to use mobile PhoneTools. This option will only install the m odem driver and INF file. 1. Insert CD into the CD-ROM. 2. Select exit if the automatic installatio n program launches.
Button Definitions Access E-mail Send SMS message Access Phonebook Show / Hide Dialpad Close Program Help Informa tion Minimize Progr am Start / Stop Internet Connection Display Definitions Current Ca.
mobile PhoneTools Internet Connection Wizard: There are two ways to create an Internet connection: 1. Select the Globe Icon within mobile PhoneTools. The Internet Connection Wizard will automatically start if there are no existing Internet connections defined.
Use Default Network Settings Customize Network Settings GSM0110UG001 Page 33.
GSM0110UG001 Page 34.
Troubleshooting If you have any questions regarding instal lation, set up, or operation of the GSM0110 CF Card, please contact the vendor or distributor from whom yo u purchased the card, or your wireless network carrier.
LIMITED WARRANTY Scope Enfora warrants to the original purchaser of the product that, for a period of one (1) year from th e date of product purchase, the product hardware, when used in conjunction wi.
which purchaser notifies Enfora in writing during the applicab le warranty period. Enfora, from time to tim e and in its sole discretion, may make available for download on its website ( www.enfora.com ) certain software bug fixes, upgrades or new releases for the product.
Governing Law This limited warranty shall be governed by the laws of the State of Texas, United States of America, without regard to conflict of laws pr inciples. This limited warranty shall not be governed in any respect by the United Nations C onvention on Cont racts for the International Sale of Goods.
An important point after buying a device Enfora GSM0110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enfora GSM0110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enfora GSM0110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enfora GSM0110 you will learn all the available features of the product, as well as information on its operation. The information that you get Enfora GSM0110 will certainly help you make a decision on the purchase.
If you already are a holder of Enfora GSM0110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enfora GSM0110.
However, one of the most important roles played by the user manual is to help in solving problems with Enfora GSM0110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enfora GSM0110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
