Instruction/ maintenance manual of the product Rosemount Emerson Process Management
Go to page of 4
Product Specification Sheet 00815-0100-4810, Rev AA June 2005 www .rosemount.com Conditioning Orifice Plate S pecification Guide.
Product Specification Sheet 00815-0100-4810, Rev AA June 2005 2 Overview This Product S pecification sheet defines the requirements for the Conditioning Orifice Plate (COP). This S pecification is also included for Electronic Pressure Instruments when integrated with the Conditioning Orifice Plate (COP) primary to form complete flowmeters.
Product Specification Sheet 00815-0100-4810, Rev AA June 2005 3 Functional Specifications • The pressure instrument shall have the capability to be supplied as mounted directly on the COP primary when the process temperature is less than 450°F (232°C).
Product Specification Sheet 00815-0100-4810, Rev AA June 2005 Emerson Process Management © 2005 Rosemount Inc. All rights reserved. ¢00815-0100-4810¤ Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. HART is a registered trademark of the HART Communications Foundation.
An important point after buying a device Emerson Process Management Rosemount (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson Process Management Rosemount yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson Process Management Rosemount - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson Process Management Rosemount you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson Process Management Rosemount will certainly help you make a decision on the purchase.
If you already are a holder of Emerson Process Management Rosemount, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson Process Management Rosemount.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson Process Management Rosemount. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson Process Management Rosemount along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
