Instruction/ maintenance manual of the product LT410 Emerson
Go to page of 2
Product Specification Sheet page 1 11/02 (Rev. 0) L IQUI - TECT ® 410 P oint Leak Detection Sensor Description The Liqui-tect 410 (LT410) provides a single-point d etection of leaks. The point detection sensor has two gold-plated sensing probes to prevent corrosion resistance and to provide accurate readings.
Product Specification Sheet page 2 11/02 (Rev. 0) Power Wiring The LT410 is rated for 24 VAC, 50/60 Hz and 0.10 amp. Figure 1 24V from Liebert environment al units to L T410 Figure 2 24V from transformer to L T410 Wiring to Auxiliary Alarm Panels The LT410 has two Form-C dry contact alarm out- put contacts: orange wires ( 1) and yellow wires (2).
An important point after buying a device Emerson LT410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson LT410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson LT410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson LT410 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson LT410 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson LT410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson LT410.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson LT410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson LT410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
