Instruction/ maintenance manual of the product CF960CK 00 Emerson
Go to page of 12
Part No. F40BP72680001 Form No. BP7268-1 READ AND SA VE THESE INSTRUCTIONS WINDJAMMER ™ ® Net Weight: 27.6 Lbs. Ceiling Fan Owner's Manual LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
2 W ARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference.
1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. One light fixture assembly c. Six fan blades d. Six blade flanges e. One ceiling cover f.
5. Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure that the ceiling cover and the coupling cover are both oriented correctly (Figure 4).
7. The fan comes with blue, black and white leads that are 80” long. Before installing the fan, measure up approximately 6 to 9-inches above the top of hanger the ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from the end of leads.
3. Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 9). 4. Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 10).
7 To avoid possible fire or shock, make sure that the electrical wires are not pinched between the light fixture assembly and the mounting plate. W ARNING ! 3. Partially install two 3/16-24 x 1/4” Phillips round head screws in two of the tapped holes in the coupling adapter (Figure 13).
8 Installation of Light Adapter Plate NOTE: In order to use the light adapter plate (supplied), the wiring harness included as part of the light fixture assembly must be removed and be reinstalled in the light adapter plate. This Section contains the procedures to accomplish this.
9 Using Y our Ceiling Fan 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. 2. Check the operation of the fan by gently pulling on the speed control pull chain switch (Figure 23). The operating sequence is as follows: THREE-SPEED 1st Pull—HIGH 2nd Pull—Medium 3rd Pull—Low 4th Pull—OFF 3.
10 WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers.
13 26 27 14 28 16 17 15 24 20 9 19 18 3 1 5 4 6 7 8 2 21 25 23 22 12 11 10 11 Before discarding packaging material, be certain all parts have been removed.
Part No. F40BP72680001 Printed in Taiwan 05/03 Form No. BP7268-1 Air Comfort Products DIVISION OF EMERSON COMPANY 8100 W. Florissant ¥ St. Louis, MO 63136 Repair Par ts Listing Model No.
An important point after buying a device Emerson CF960CK 00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF960CK 00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF960CK 00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF960CK 00 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF960CK 00 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF960CK 00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF960CK 00.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF960CK 00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF960CK 00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
