Instruction/ maintenance manual of the product CF945AB Emerson
Go to page of 12
Part No. F40BP72650000 Form No. BP7265 READ AND SA VE THESE INSTRUCTIONS Model No. CF945WB 00 CF945HTW 00 CF945AB 00 CF945PW 00 CHA TEAU ROY ALE Series Ceiling Fan Owner's Manual ® Net Weight: 33.
2 W ARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference.
1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. One switch housing c. Five fan blades d. One ceiling cover e. Five blade flanges f.
IMPORTANT This Owner’s Manual is divided into two sections. The first section, REMOTE CONTROL PROCEDURES, describes how to install the 9-volt alkaline battery (not included) in the remote control transmitter, and how to set the operating frequency of the transmitter and receiver.
Setting Operating Fr equency of T ransmitter and Receiver Your remote control transmitter and receiver have code switches which must be set on one of 16 possible code combinations. The four levers (numbered 1, 2, 3, and 4) on the switches are factory- set in the ON (up) position.
5. Reinstall the hanger ball (Figure 5) on the downrod as follows. Route the two 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball.
7 If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 10. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation).
8 17. The blade flanges have an interlocking feature that must be fully engaged before tightening the screws. Make sure all the flanges are properly engaged and then tighten the flange screws.
9 Installation of the Decorative Suppor t Rods Assembly NOTE: The following procedures are to be performed only if you have installed the 18” (or longer) downrod. 1. Loosen the setscrew in the collar of the rod support assembly using the 5/64” hex wrench (supplied) and slide the support assembly over the downrod (Figure 16).
10 Operation IMPORTANT Fan installation must be completed, including the installation of the fan blades, before testing of the remote control. Your remote control has full control of your fan and lights. NOTE: Prior to operation of the down light from the remote control, make sure the switch on the light is ON.
T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan 2. Check line wire connections to fan in the in the ceiling cover.
Model No. Key N o. Description CF945WB00 CF945HTW00 CF945AB00 CF945PW00 Hanger Ball Assembly, 761655-20 761655-12 761655-3 761655-22 Consisting of: 1 Hanger Bracket — — — — 2 Hanger Ball — .
An important point after buying a device Emerson CF945AB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF945AB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF945AB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF945AB you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF945AB will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF945AB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF945AB.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF945AB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF945AB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
