Instruction/ maintenance manual of the product CF704SPB03 Emerson
Go to page of 8
READ AND SA VE THESE INSTRUCTIONS SNUGGER Ceiling Fan Owner's Manual Part No. F40BP70800008 Form No. BP7080-8 Model No. Net Weight: 13.9 Lbs. Net Weight: 1 1.2 Lbs. Model No. Net Weight: 13.9 Lbs. Net Weight: 1 1.2 Lbs. DATE CODE: The date code of this fan may be found on the box, stamped in ink on a white label.
WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan housing b. Mounting plate c. Fan motor assembly d. Five fan blades e. Five blade flanges with captive screws f.
1. Securely attach the mounting plate to the outlet box (Figure 2) using two screws (supplied with outlet box). Pull the black, white and ground wires out of the outlet box through the hole in the mounting plate and lay them to the side as shown in Figure 3.
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 1. Connect the green grounding wires from the motor bracket and the mounting plate to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation).
IMPORTANT CARE INSTRUCTIONS For Your Ceiling Fan Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Reversing switch in neutral position. 1. Make sure reversing switch position is all the way to start.
Repair Par ts List Model Numbers Key Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. N o. Description CF705SORB03 CF705SWW03 CF705SPB03 CF705SAB03 C.
An important point after buying a device Emerson CF704SPB03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF704SPB03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF704SPB03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF704SPB03 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF704SPB03 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF704SPB03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF704SPB03.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF704SPB03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF704SPB03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
