Instruction/ maintenance manual of the product CF550ORB00 Emerson
Go to page of 16
Part No. F40BP74530001 Form No. BP7453-1 ETL Model No.: CF550 READ AND SA VE THESE INSTRUCTIONS 54” Ceiling F an Owner's Manual CF550BS00 CF550ORB00 Model Number L UXE ECO ™ Net W eight: 20.9 Lbs. DATE CODE: The date code of this fan may be found on the box, stamped in ink on a white label.
WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2 . Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
3 Unpac king Instr uctions 1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. Light kit assembly c. One ceiling cover d. One coupler cover e.
4 Electrical R equir ements If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture. Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.
5 Ho w to Put Y our Ceiling F an T ogether (continued) FAN MOTOR ASSEMBL Y CEILING COVER DOWNROD RUBBER GROMMET COUPLER COVER Figure 3 4. Make sure the rubber grommet is properly installed onto the coupling cover then slide the coupler cover onto the downrod until it rests on top of the motor housing.
6 Ho w to Hang Y our Ceiling F an The fan must be hung with at least 7' of clearance from floor to blades (Figure 6). CEILING FLOOR A T LEAST 7' Figure 6 WARNING ! The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs.
7 ETL Model No.: CF550 Ho w to W ire Y our Ceiling F an If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
8 4 Position the light kit assembly onto the fan motor assembly, safely tucking all wires and connectors inside the light kit assembly. 5. Engage the two key slots on the light kit assembly with two loosened screws in motor housing assembly. Rotate the light kit assembly clockwise to engage the two screws into both slots and tighten securely.
9 ETL Model No.: CF550 W all Control Installation (continued) W all Control Pr ocedures SINGLE-POLE INST ALLA TION CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.
10 ETL Model No.: CF550 W all Control Installation (continued) NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire.
11 ETL Model No.: CF550 W all Control Installation (continued) 6. Screw wall control into wall box using the supplied screws. Leave wall control in “OFF” mode until fan installation is completed. 7. The wall control is supplied with a white, ivory, and almond color switch covers.
Using Y our Ceiling F an Fan installation must be completed, including the installation of the fan blades, before testing the remote control. WARNING ! Your wall control has full control of your fan and light. 1. To set the desired fan speed, press the ( ) button to decrease the speed and the ( ) to increase the speed.
13 ETL Model No.: CF550 T r ouble Shooting WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1.
14 ETL Model No.: CF550 R epair Par ts 1 7 3 2 13 14 6 10 11 18 12 15 16 17 19 20 9 8 5 4.
15 ETL Model No.: CF550 R epair Par ts Listing Key Model Number No. Description CF550BS00 CF550ORB00 * Hanger Ball Assembly, 761655-17 761655-32 Consisting of: 1 Hanger Bracket —— 2 Hanger Ball —— 3 Downrod (4.
Part No. F40BP74530001 Printed in China 08/12 Form No. BP7453-1 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 ETL Model No.
An important point after buying a device Emerson CF550ORB00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF550ORB00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF550ORB00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF550ORB00 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF550ORB00 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF550ORB00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF550ORB00.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF550ORB00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF550ORB00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
