Instruction/ maintenance manual of the product CF452ORB00 Emerson
Go to page of 12
Part No. F40BP73980001 Form No. BP7398-1 U.L. Model No.: CF452 READ AND SA VE THESE INSTRUCTIONS 52” Ceiling F an Owner's Manual CF452AW00 - Summer W hite CF452AP00 - Antique P ewter CF452BS00 .
WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. One switch housing assembly c. One ceiling cover d. Five blade flanges e. One hanger ball/4.
2. Mount blade flanges to fan blades using three M5 x 6mm washer head blade screws (Figure 2). NOTE: Take care not to scratch fan housing when installing blades. 4 1. Rotate the motor hub to align the hub motor area over each of the five shipping retainers.
SWITCH HOUSING MOUNTING SCREW (3) SWITCH HOUSING ASSEMBL Y MOTOR CONNECTOR SWITCH HOUSING CONNECTOR 5 Figure 4 4. The blade flanges have an interlocking feature that must be fully engaged before tightening the screw. Make sure all the flanges are properly engaged and then tighten the flange screws.
CEILING COVER HANGER BALL PIN SETSCREW Figure 9 It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.
7 Ho w to Hang Y our Ceiling F an The fan must be hung with at least 7' of clearance from floor to blades (Figure 10). A T LEAST 7' CEILING FLOOR Figure 10 WARNING ! The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs.
8 U.L. Model No.: CF452 If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. 2. Check the operation of the fan by gently pulling on the pull chain switch. 3. All fans are shipped from the factory with the reversing switch positioned “down” to circulate air downward.
10 WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. T rouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers.
11 20 6 5 9 13 12 19 16 10 14 17 18 21 7 8 11 1 2 3 15 4 U.L. Model No.: CF452 Before discarding packaging material, be certain all parts have been removed.
U.L. Model No.: CF452 Part No. F40BP73980001 Printed in China 07/09 Form No. BP7398-1 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St.
An important point after buying a device Emerson CF452ORB00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF452ORB00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF452ORB00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF452ORB00 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF452ORB00 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF452ORB00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF452ORB00.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF452ORB00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF452ORB00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
