Instruction/ maintenance manual of the product CF2500S01 Emerson
Go to page of 16
READ AND SA VE THESE INSTRUCTIONS “Botanica” Series Model No. CF2500OB01 CF2500HTW01 CF2500S01 CF2500TG01 Botanica Series Ceiling Fan Owner's Manual Part No.
2 W ARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference.
1. Open styrofoam unit containing fan. Remove top half of styrofoam unit. Remove parts and check to see that you have received the following: a. Fan motor and housing assembly b. One motor cover c. One ceiling cover d. Five blade flanges e. One hanger ball/downrod assembly f.
Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capa- ble of withstanding a load of at least 50 pounds. If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
NOTE: Make sure the unused black motor lead is capped with a wire connector. Make sure all wire connectors are completely inside motor coupling cover and not pinched between the motor coupling cover and motor. 9. Screw two 1” threaded studs (supplied) into the motor (Figure 6).
17. Reinstall the switch housing assembly by passing the wires from the motor shaft through the collar, screw the assembly onto the motor shaft (Figure 11). Tighten the setscrew using the 5/32” hex wrench (supplied). Engage the connector from the switch housing to the motor connector.
18. Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box (Figure 13). 7 CEILING FLOOR A T LEAST 7' Figure 12 TWO SCREWS SUPPLIED WITH OUTLET BOX .
22. Securely connect the wiring harness connector to the receiver connector, and connect the blue and yellow wires to the blue and yellow wires from the receiver (Figure 4). 23. Turn the receiver so that the flat side aligns with the open side of the hanger bracket (Figure 15).
14. Use three 10-24 x 3/8" pan head screws and flat washers (supplied) to secure flange to blade (blades ordered separately) (Figure 22). Repeat for the remaining four blades.
20. Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box (Figure 27). 10 CEILING FLOOR A T LEAST 7' Figure 26 TWO SCREWS SUPPLIED WITH OUTLET BOX HANGER BRACKET TA B OUTLET BOX Figure 27 19.
11 NOTE: If you are installing a SR330 Remote Control or a SW350 Wall Control to operate the fan and light, refer to the installation instructions and wiring diagrams shown in Section A of this Owner’s Manual . 22. For a wall control installation you will need a three-wire (with ground) conductor cable between the ceiling and wall outlet boxes.
Attaching Light Kit To install an Emerson accessory light kit, remove the four screws securing the switch housing cover assembly to the switch housing.
T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. WARNING: Make sure main power is turned off. 2. Loose power line connections to the fan, 2.
1 2 15 3 20 18 4 26 9 8 30 19 20 29 27 22 13 14 17 5 23 24 7 12 11 28 10 25 6 21 16 19 Repair Par ts 14 ACCESSORIES 1. Ceiling Fan Light Kits (see store or catalog). 2. Ceiling Fan/Light Controls (see store or catalog). 3. Downrod Extension Kits (see store or catalog).
15 Repair Par ts List Ref. Botanica Models N o. Description CF2500OB01 CF2500S01 CF2500HTW01 CF2500TG01 Hanger Pack, 761655-9 761655-16 761655-12 761655-13 containing: 1 Bracket, Hanger (1) — — .
Part No. F40BP72200003 Printed in Taiwan 04/03 Form No BP7220-3 LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
An important point after buying a device Emerson CF2500S01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF2500S01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF2500S01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF2500S01 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF2500S01 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF2500S01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF2500S01.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF2500S01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF2500S01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
