Instruction/ maintenance manual of the product CF130WW00 Emerson
Go to page of 16
Part No. F40BP74040000 Form No. BP7404 UL Model No.: CF130 READ AND SA VE THESE INSTRUCTIONS Net Weight: 10.6 Lbs. Damp Loca tion 30” Mini Ceiling F an Owner's Manual CF130BS00 Br ushed Steel C.
WARNING: T o avoid fire, shock, and serious personal injury , follow these instructions. Safety Instructions 1. Read your owner ’ s manual carefully and keep it for future reference.
3 THIS F AN IS SUIT ABLE FOR DAMP LOCA TIONS SUCH AS COVERED PORCHES, COVERED P A TIOS, AND COVERED DECKS... ANYWHERE THERE IS A ROOF OVERHEAD. This Manual is Designed to Make it as Easy as Possible for Y ou to Assemble, Install, Operate and Maintain Y our Ceiling Fan Do not install or use fan if any part is damaged or missing.
4 2. Remove the fan motor assembly from the protective plastic bag. Place all carton contents on a protective surface. B. HANGER BRACKET C. 4.5" DOWNROD ASSEMBL Y D. CEILING COVER F . COUPLER COVER H. SWITCH HOUSING G. FAN BLADES (3) E. DECORA TIVE LOWER COVER A.
Y our new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.
6 UL Model No.: CF130 1. Carefully turn the partially assembled ceiling fan right side up and place the fan securely into the packing sytrofoam in preparation for final assembly . 2. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 4).
7 UL Model No.: CF130 HAIRPIN CLIP CLEVIS PIN MOTOR COUPLING COUPLER COVER GROMMET DOWNROD SETSCREW (2) Figure 6 4. While pulling up on the downrod, securely tighten the two setscrews in the motor coupling (Figure 6). NOTE: The setscrews must be properly installed as described above, or fan wobble could result.
1. Position the hanger bracket on the outlet box so that the T -slots in the hanger bracket are aligned with the outlet box screws (Figure 12). Installation of Hanger Brack et The fan must be hung with at least 7' of clearance from floor to blades (Figure 1 1).
T urning off wall switch is not sufficient. T o avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.
UL Model No.: CF130 10 1. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation) (Figure 16). Securely connect wires using wire connectors supplied.
UL Model No.: CF130 NOTE: When installing the ceiling fan using the close-to-the-ceiling method, carefully lift the fan assembly from the hook on the hanger bracket and proceed as follows.
12 UL Model No.: CF130 Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock. ! WARNING Maintenance IMPORT ANT CARE INSTRUCTIONS for your Ceiling Fan Periodic cleaning of your new ceiling fan is the only maintenance that is needed.
T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Fuse or circuit breaker 1. Check main and branch start. blown. circuit fuses or circuit breakers. WARNING: Make sure main power is turned off. 2. Loose power line 2. Check line power connections connections to the fan.
UL Model No.: CF130 14 Damp Part Numbers Key Model No. Model No. Model No. No. Description CF130BS00 CF130ORB00 CF130WW00 * Hanger Pack Consisting of: 762231-4 762231-8 762231-1 1 Hanger Bracket Assembly —— — 2 Hanger Ball —— — 3 Downrod, 4.
R epair Par ts 16 17 10 8 20 13 9 18 7 19 1 21 22 3 2 4 6 12 4 0 3 2 1 11 14 15 5 Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REP AIR P ARTS WHEN ORDERING REP AIR P ARTS, AL WA YS GIVE THE FOLLOWING INFORMA TION: The model number of your Fan will be found on a label attached to the top housing.
UL Model No.: CF130 Part No. F40BP74040000 Printed in China 12/09 Form No. BP7404 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W . Florissant • St.
An important point after buying a device Emerson CF130WW00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Emerson CF130WW00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Emerson CF130WW00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Emerson CF130WW00 you will learn all the available features of the product, as well as information on its operation. The information that you get Emerson CF130WW00 will certainly help you make a decision on the purchase.
If you already are a holder of Emerson CF130WW00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Emerson CF130WW00.
However, one of the most important roles played by the user manual is to help in solving problems with Emerson CF130WW00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Emerson CF130WW00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
