Instruction/ maintenance manual of the product 1723L Elo TouchSystems
Go to page of 29
USER MANUAL Elo T ouch Solutions 1523L and 1723L T ouchmonitors SW601951 Rev A.
User Manual: 1523L, 1723L SW601951 Rev A, Page 2 of 29 Copyright © 2012 Elo T ouch Solutions, Inc. All Rights Reserv ed. No part of this publication may be rep r oduced, transmitted, transcribed, sto.
User Manual: 1523L, 1723L SW601951 Rev A, Page 3 of 29 T able of Content s Chapter 1: Introduction ...........................................................................................4 Chapter 2: Inst allation ..................................
User Manual: 1523L, 1723L SW601951 Rev A, Page 4 of 29 Chapter 1: Introduction Product Description Y our new touchmonitor combines the reliable performance of Elo T ouch Solutions touch products with the latest developments in touch technology and display design.
User Manual: 1523L, 1723L SW601951 Rev A, Page 5 of 29 Chapter 2: Inst allation Unp acking the T ouchmonitor Open the carton and verify that the following items are present: T ouchmonitor with rem.
S t and Positions The stand of the touchmonitor can be conver ted between two positions: the low profile “hostess” position and the high prof ile “upright” position.
T o convert the stand into the hi gh profile “upright” position, se cure the thumbscrews into the high or “H” screw-holes in the bottom of the base. Upright position T o convert the stand i nto the low profile “hostess” position, secure the thumbscrews into the low or “L” screw-holes in the bottom of the base.
User Manual: 1523L, 1723L SW601951 Rev A, Page 8 of 29 T ouchmonitor Connections 1. Connect the DVI or VGA video cables between the monitor ’ s DVI/VGA input connectors and your DVI/VGA video source, respectively . T ighten the video cable’s screws for best performance.
Select the applicable driver from the Elo T ouch Solutions website and download: For Windows XP installations, install the “USB T ouchs creen Drivers” when prompted: User Manual: 1523L, 1723L SW60.
For Windows 7 installations, check the “Inst all dr iver” box under “Elo USB Interfaces – Other T ouchscreens” After accepting the end-user license agree ment, the drivers will finish installing. Reboot your computer after the inst all is complete.
Chapter 3: Mounting Rear VESA Mount For the 15-inch touchmonitor , a four-hole 75x 75mm mounting pattern for M4 screws is provided on the rear of the monitor . Remove the stand using a Phillip s screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
For the 17-inch touchmonitor , a four-hole 75x 75mm mounting pattern for M4 screws is provided on the rear of the monitor . Remove the stand using a Phillip s screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
Base Mount For the 15-inch touchmonitor , a threaded three-hol e mounting pattern for M4 screws is provided on the bottom of stand base fo r mounting or securing. For the 17 inch touchmonitor , a threaded three-hol e mounting pattern for M4 screws is provided on the bottom of stand base fo r mounting or securing.
User Manual: 1523L, 1723L SW601951 Rev A, Page 14 of 29 Chapter 4: Operation Power T o turn the touchmonitor on or off, pr ess the touchmonitor power button once.
needed, through the Calibration function in the Elo driver control panel. The iT ouch Plus driver will on ly support multiple m onitor if they are all using the iT ouch Plus touch technology . T o use multiple iT ouch Plus monitors, double cli ck on the EloConfig desktop shortcut to open up the Elo T ouchscreen C onfiguration screen.
User Manual: 1523L, 1723L SW601951 Rev A, Page 16 of 29 No calibration is requi red for this technology . Gesture Support The IntelliT ouch Plus and Projected Capacitive touch technologies enable several gestures that support single and multiple contact s.
The buttons and their functionality are: Button Function when OSD is not displayed: Function when OSD is displayed: Menu Display OSD main menu Return to previous OSD menu Display OSD Brightness submen.
User Manual: 1523L, 1723L SW601951 Rev A, Page 18 of 29 The OSD buttons control an on-screen graphical user interface, which displays on top of your input video.
User Manual: 1523L, 1723L SW601951 Rev A, Page 19 of 29 OSD Language Selects which language the OSD information is displayed in. The available languages are: English, French, Ita lian, German, S panis.
User Manual: 1523L, 1723L SW601951 Rev A, Page 20 of 29 Chapter 5: T echnical Support If you are experiencing trouble with your touc hmonitor , refer to the following suggestions. If the problem persists, please cont act your local dealer or contact Elo T ouch Solutions Customer Service.
User Manual: 1523L, 1723L SW601951 Rev A, Page 21 of 29 T echnical Assist ance V isit www .elotouch.com/products for tec hnical specifications for this device V isit www .elotouch.com/go/webs upport for online self-help. V isit www .elotouch.com/go/contactsupport for technical support.
Chapter 6: Safety & Maintenance Safety T o avoid risk of electric shock, follow a ll safety notices and do not disassemble the touchmonitor . They are not user-serviceable. Ensure that your installation is equipped to ma intain the specified environment al conditions listed in the T echnical S pecifications chapter .
W aste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed of with household waste. It should be deposited at a facility that enabl es recovery and recycling.
User Manual: 1523L, 1723L SW601951 Rev A, Page 24 of 29 Chapter 7: Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer ’s label.
User Manual: 1523L, 1723L SW601951 Rev A, Page 25 of 29 as required by EMC Directive 2004/108/EC as indi cated in European S tandard EN 55022 Class B and the Low V oltage Directive 2006/95/EC as indicated in European S tandard EN 60950. General Information to all Users : This equipment generates, uses and can radiate radio frequency energy .
User Manual: 1523L, 1723L SW601951 Rev A, Page 26 of 29 III. Agency Certifications The following certifications and marks have been issued or declared for this monitor: Australia C-T ick Canada CUL, IC China CCC Europe CE Japan VCCI Korea KCC, e-S tandby Mexico CoC T aiwa n BS MI United S tates FCC, UL IV .
Explanation of Markings (1). In accordance with the SJ/T1 1364-2006 requi rement, the electronic information products are marked with the following pollution control logo.
User Manual: 1523L, 1723L SW601951 Rev A, Page 28 of 29 Chapter 8: W arranty Information Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer , Seller warrants to Buyer that the Product shall be free of defect s in materials and workmanship.
User Manual: 1523L, 1723L SW601951 Rev A, Page 29 of 29 Check out Our W ebsite! www .elotouch.com Get the latest... Product Information S pec ifications News on upcoming events Press r.
An important point after buying a device Elo TouchSystems 1723L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elo TouchSystems 1723L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elo TouchSystems 1723L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elo TouchSystems 1723L you will learn all the available features of the product, as well as information on its operation. The information that you get Elo TouchSystems 1723L will certainly help you make a decision on the purchase.
If you already are a holder of Elo TouchSystems 1723L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elo TouchSystems 1723L.
However, one of the most important roles played by the user manual is to help in solving problems with Elo TouchSystems 1723L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elo TouchSystems 1723L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
