Instruction/ maintenance manual of the product 3 Alesis
Go to page of 9
A lesis MICROVERB III Users Manual.
MICROVERB III Before Unpacking Y our Unit... Introduction Born from the original Alesis MICROVERB and MICROVERB II, the units that launched the revolution in low cost professional digital reverberation, the MICROVERB III carries on this same tradition of world class performance at a phenomenal price.
CONTROLS INPUT ST A TUS INDICA TOR The INPUT ST A TUS INDICA TOR is actually a 3 colored LED that shows several input conditions. When the indicator glows yellow , the input signal to the MICROVERB III is too low and the INPUT level should be increased.
INST ALLA TION Before unpacking your new Alesis MICROVERB III unit, take a moment to look through this instruction manual. We’ve made it brief and informative and it will answer any questions that you might have. Some helpful setup thoughts are included along with some useful application hints.
FIGURE 2 STEREO CONNECTION TO MIXING CONSOLE VIA AUX SENDS AND RETURNS Another way of interfacing the MICROVERB III unit to a mixer or recording console would be in-line across the output of your mixing console.
OPERA TION MICROVERB III is easy to use in almost any application. Simply do the following: 1. Apply a signal to either the right input jack for mono (used with a single instrument), or both left and right jacks for stereo. 2. Increase the INPUT control until the INPUT ST A TUS INDICA TOR briefly lights red on occasional program peaks.
APPLICA TIONS About Reverb... Reverb can be thought of as a great number of distinct echoes (called reflections) that occur so fast and in such large number that our ear hears them and interprets them as one sound - the distinct sound we know as reverb.
GA TES Gated reverb is a very popular effect on drums first found on English records in the early 1980’s. The MICROVERB III’s gate programs simulate applying a noise gate (a device that automatica.
SPECIFICA TIONS ELECTRICAL CHARACTERISTICS FREQUENCY RESPONSE 20Hz - 15KHz (Effect), 20KHz (Direct), ± 2dB DYNAMIC RANGE 85dB HARMONIC DISTOR TION .15% @ 1KHz @ 0 dBV INPUT NUMBER OF CHANNELS 2 NOMIN.
An important point after buying a device Alesis 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alesis 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alesis 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alesis 3 you will learn all the available features of the product, as well as information on its operation. The information that you get Alesis 3 will certainly help you make a decision on the purchase.
If you already are a holder of Alesis 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alesis 3.
However, one of the most important roles played by the user manual is to help in solving problems with Alesis 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alesis 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center