Instruction/ maintenance manual of the product DBX-85 Eco Alecto
Go to page of 8
NL LET OP Dit is de handleiding van de DBX-85/88 Indien u beschikt over de DBX-85/88 ECO dient u de DBX-85/88 ECO handleiding te downloaden. UK A TTENTION This is the manual of the DBX-85/88 If you own the DBX-85/88 ECO you need to download the DBX-85/88 ECO manual.
Owner’s Manual DBX-85 (DRAFT) 1.8GHz DECT Baby Monitor, Talk Back, with Nightlight.
2 TABLE OF CONTENTS Safety Information Getting Started Unpacking Baby Unit Parent Unit Charge r Basic Steps t o Install Power On/Off Monitoring Sensitivity Adjust Volume Talk Back Paging Nightlight Ou.
3 • Do not expose the units to extreme heat or direct sunlight. • To prevent electric shock, do not ope n the cabinets of the baby unit, parent unit and charger. • Avoid metallic contact (e.g. metal clips, ke ys) between the battery contacts and charging con ductors.
4 Charger Basic Steps to Install 1. Connect the output plug of the mains ad apter to the DC socket on the side of the baby unit and the mains adapter to the wall mains supply. 2. Plug the charger adaptor for the Pa rent Unit into the mains power socket.
5 CAUTION Use only the charger sup plied with baby monitor. Incorrect charger type can cause damage to the handset. Input: 230 VAC 50 Hz Output: 9 VDC 300 mA CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non- rechargeable batteries; use recommended type supplied w ith this telephone .
6 • Press button to increase or to decrease. There are five levels of sensitivity. When all fi ve green LEDs are lit, it represents the highest sensitivity. When only one g reen LED is lit, it represents the lowest sensitivity. Adjust Volume There are 5 volume levels on each Unit and the re is also an Off setting on the Parent Unit.
7 Charging the Battery Place the parent unit on its charge cradle to cha rge the battery. When charging, the red LED on the charger will lit steadily. Note: The Parent Unit must never be operate d on the charging cradle without batteries. Restore to Default Setting You can return the baby and parent uni ts to factory default settings.
An important point after buying a device Alecto DBX-85 Eco (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alecto DBX-85 Eco yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alecto DBX-85 Eco - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alecto DBX-85 Eco you will learn all the available features of the product, as well as information on its operation. The information that you get Alecto DBX-85 Eco will certainly help you make a decision on the purchase.
If you already are a holder of Alecto DBX-85 Eco, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alecto DBX-85 Eco.
However, one of the most important roles played by the user manual is to help in solving problems with Alecto DBX-85 Eco. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alecto DBX-85 Eco along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
