Instruction/ maintenance manual of the product Gas hob Electrolux
Go to page of 24
1 INSTRUCTION- AND INST ALLA TION BOOK Gas hob 6530 DG-m G B 949600249 GB.
2 Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new hob efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference.
3 Contents P a g e no F or the user Y our new appliance ...................................................................................... 2 Safety information .......................................................................................
4 Safety information These warnings are pro vided in the interests of your safety . Ensure you fully understand them before installing or using the appliance. Y our safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance.
5 Description of the pr oduct Burner Control knob Air intake Air intake The primary air intake aperture must ne ver be blocked by objests of any kind at any time.
6 Burner markings Symbols at each control knob indicates which burner is adjusted with the control knob . Front Burner Back burner P anel markings Each control knob has a ring sho wing the scale of markings.
7 Burner cover/inner b urner ring/outer burner ring T ogether with the inner burner ring the outer burner ring forms a space where the final mixture of gas and air tak es place in order for the gas burn correctly . Please note: It is very important that the inner burner ring/outer b urner ring is placed correctly , together with the co ver .
8 1. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position) 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. If it is not possible to connect the unit to mains, a match may be used to ignite the burner .
9 Maintenance and cleaning For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface.
10 Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis.
11 The operating panel with knob, pan support and burner co vers/rings are to be cleaned with ordinary cleaning agents. Do not use any kind of scouring powder . A void saucepans boiling ov er . If water gets into the burner , this should be remov ed before re-igniting the burner , e.
12 N L1 240 V 1N + PE T ype of gas Adjusted to natural gas: G20-20 mbar Category and pressures UK: II 2H3+ 20 mbar - 28/37 mbar Max. nominal load Q na H S : Medium sized burner = 1,9 kW x 1 Large sized burner = 2,7 kW x 1 T otal= 4,6 kW FSD The unit features fully-secured gas taps (thermo-fuse).
13 This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.
14 Connection to the gas supply should be with either rigid or semi- rigid pipe, i.e. steel or copper. The connection should be suitable for connection to RC ½ ( ½ BSP male conical thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installaion.
15 Caution: In order to av oid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Headroom The distance to any shelv es or tops of a cabinet under the hob is to be at least 47 mm.
16 It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. Installation in work tops with a base unit underneath If the hob is to be installed on top of a base unit, a board must be mounted underneath the hob (e.
17 Do not install the hob above drawers..
18 The unit´s externall y measured length 145 mm: Cooker hood 290 mm: T wo-zone ceramic-top electric hob T wo-burner gas hob Grill Fryer Wo k 580 mm: Four -zone ceramic-top electric hob Four -burner .
19 Something not w orking If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee.
20 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area.
21 AEG of fer the following guarantee to the first purchaser of this appliance: 1. The guarantee is v alid for 12 months commencing when the appliance is handed ov er to the first retail purchaser , which must be verif ied by purchase in voice or similar documentation.
22 Before you mov e please contact your nearest Customer Care centre, listed belo w , to giv e them details of your new home. The y will then ensure that the local service organisation is a ware of your mov e and able to look after you and your appliances.
23.
24 325 88-1620 Rev . 4-017.
An important point after buying a device Electrolux Gas hob (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux Gas hob yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux Gas hob - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux Gas hob you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux Gas hob will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux Gas hob, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux Gas hob.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux Gas hob. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux Gas hob along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
