Instruction/ maintenance manual of the product FN620K Electrolux
Go to page of 24
• Assembly • Operation • Maintenance • Service and Adjustments • Storage • Troubleshooting • Repair Parts OWNER'S MANUAL 184873 11.27.
2 • Ne ver operate the tiller without proper guards , plates, or other saf ety protective de vices in place. • K eep children and pets aw ay . • Do not ov erload the machine capacity by attempting to till too deep at too f ast a rate. • Ne ver operate the machine at high speeds on slippery surf aces.
3 CONGRA TULA TIONS on y our purchase of a new tiller . It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per fo r m ance. Should you e xperience any prob lems you can not easily remedy , please contact your nearest authorized service center .
4 ASSEMBL Y OPERA T OR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the oper ating position (standing behind tiller handles). Y our new tiller has been assembled at the f actor y with e xception of those par ts left unassembled f or shipping pur poses.
5 ASSEMBL Y TILLER HANDLES CABLE HANDLE P ANEL BOL TS FIG. 2 HAN DLE P ANEL HEX BOL T 5/16-18X3/4" TILLER HANDLE HEX BOL T 5/16-18X1" FLA T W ASHER LOCK W ASH ER NUT DEPTH ST AKE SUPPORT BOL T HEX BOL TS, LOCK W ASH ERS, AND HEX NUTS DEPTH ST AKE SUPPORT NUT “A” ENGINE BRA CK ET HAL VES FIG.
6 KNO W Y OUR TILLER READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TILLER. Compare the illustrations with y our tiller to familiarize y ourself with the location of various controls and adjustments. Sav e this manual f or future reference .
7 OPERA TION The operation of any tiller can result in f oreign objects thrown into the e yes, which can result in severe e ye damage . Alwa ys wear safety glasses or eye shields bef ore star ting y our tiller and while tilling. We recommend a wide vision saf ety mask over spectacles or standard saf ety glasses.
8 OPERA TION FIG. 7 OIL FILLER PLUG OIL LEVEL T O ST ART ENGINE (See Fig. 8) CA UTION: Keep drive contr ol bar in “DISENGA GED” position when start- ing en gine. When star ting engine f or the fi rst time or if engine has run out of fuel, it will take e xtra pulls of the recoil star ter to mov e fuel from the tank to the engine.
9 OPERA TION • Y ou will fi nd tilling much easier if you lea ve a ro w un- tilled between passes. Then go back betw een tilled rows . (See Fig. 9) There are two reasons f or doing this. First, wide tur ns are much easier to negotiate than about-f aces.
10 GENERAL RECOMMEND A TIONS The warranty on this tiller does not co ver items that ha ve been subjected to operator ab use or negligence. T o receiv e full value from the w arranty , operator must main tain tiller as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your tiller .
11 MAINTENANCE FIG. 12 AIR CLEANER (See Fig. 13) Ser vice air cleaner car tridge e ver y twenty-fi ve hours, more often if engine is used in very dusty conditions. • Loosen air cleaner screws, one on each side of cov er . • Remo ve air cleaner cov er .
12 MUFFLER Do not operate tiller without muffl er . Do not tamper with e xhaust system. Damaged muffl ers or spark arresters could create a fi re hazard. Inspect pe ri odi cally and re place if nec es sar y . If y our engine is equipped with a spar k arrester screen assembly , re mov e ev er y 50 hours f or cleaning and inspection.
13 TILLER T O ADJUST HANDLE HEIGHT (See Fig. 15) F actor y assemb ly has provided lowest handle height. Se lect handle height best suited f or your tilling conditions. Handle height will be diff erent when tiller digs into soil. • If a higher handle height is desired, loosen the f our nuts securing handle panel to engine brack ets.
14 SER VICE AND ADJUSTMENTS TINE OPERA TION CHECK (See Fig. 21) Be sure tines do not rotate when engine is running and tine control is in the “OFF” position. W ARNING: Disconnect spark plug wire from spark plug to pre vent star ting while chec king tine operation.
15 SER VICE AND ADJUSTMENTS V -BEL T IDLER PUL LEY TRANS MIS SION PUL LEY BEL T GUIDE ENGINE PULLEY BEL T GUIDE T O REPLA CE V -BEL T (See Fig. 23) Replace V -belt if it has stretched considerab ly or if it has crac ks or fray ed edges. Belt guard must be remo ved to ser vice belt.
16 ST ORA GE ENGINE OIL Drain oil (with engine w ar m) and replace with clean oil. (See “ENGINE” in the Maintenance section of this man ual). CYLINDER(S) • Remo ve spark plug. • P our 1 ounce (29 ml) of oil through spar k plug hole into cylinder .
17 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “T O ST ART ENGINE” in the Operation section. 3. Engine fl ooded. 3. Wait se veral min utes before attempting to star t. 4. Dir ty air cleaner . 4. Clean or replace air cleaner car tridge.
18 REP AIR P AR TS TILLER - - MODEL NUMBER FN620K HANDLE ASSEMBL Y 1 137176X505 Brack et, Handle 2 72140512 Bolt, Carriage 5/16-18 UNC x 1-1¦2 3 9266R Grip, Handle 4 151473 Handle, L.H. 5 73680500 Lockn ut, Crown 5/16-18 6 19111116 W asher 11/32 x 11/16 x 16 Ga.
19 REP AIR P AR TS TILLER - - MODEL NUMBER FN620K BEL T GU ARD AND PULLEY ASSEMBL Y KEY P ART NO . NO . DESCRIPTION 16 12000035 Ring, Klip 17 73350600 Nut, He x, Jam 3/8-16 18 161806 Pulley , Idler 19 175377 Ar m, Idler 20 74760620 Bolt, He x 3/8-16 x 1-1/4 21 106968X Shaft, Idler Ar m 25 73350500 Nut, He x, Jam 5/16-18 KEY P ART NO .
20 REP AIR P AR TS TILLER - - MODEL NUMBER FN620K WHEEL AND DEPTH ST AKE ASSEMBL Y 1 9194R Pin, Cle vis 2 74760520 Bolt, He x 5/16-18 x 1-1/4 3 74760512 Bolt, He x 5/16-18 x 3/4 4 73220500 Nut, He x 5/16-18 5 10040500 W asher , Lock 5/16 7 4921H Clip , Hair pin 8 318J Suppor t, Depth Stake , R.
21 KEY P ART NO . NO . DESCRIPTION 1 165774 Tine, Outer , R.H. 2 4921H Retainer , Spring 3 165772 Tine, Inner , R.H. 4 165771 Tine, Inner , L.H. 5 165773 Tine, Outer , L.
22 REP AIR P AR TS TILLER - - MODEL NUMBER FN620K TRANSMISSION KEY P ART NO . NO . DESCRIPTION 16 19091412 W asher 9/32 x 7/8 x 12 Ga. 17 19092016 W asher 9/32 x 1-1/4 x 16 Ga.
23 KEY P ART NO . NO . DESCRIPTION 1 132629 Decal, Logo 2 163989 Decal, Logo 4 127185X Decal, Descr iption 5 110613X Decal, Tine Control 6 110614X Decal, Hand Placement 8 120076X Decal, W ar ning, Rotating Tines 9 171803 Decal, Briggs & Stratton 10 171806 Decal, 3.
00137 LIMITED W ARRANTY The Manuf acturer warrants to the original consumer purchaser that this product as manuf actured is free from de- f ects in mater ials and work man ship.
An important point after buying a device Electrolux FN620K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux FN620K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux FN620K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux FN620K you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux FN620K will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux FN620K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux FN620K.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux FN620K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux FN620K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
