Instruction/ maintenance manual of the product FM4863-an Electrolux
Go to page of 32
FM4863-an Induction wok Installation and Oper ating Instructions.
2 Dear Customer , Please read these user in stru ctions caref ully and keep them to refer to later . Please pass the user instructions on to any future owner of the appli- ance. The following symbols ar e used in the text: 1 Safety instructions War ni ng ! Information that affects your personal safety .
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance .
4 Oper ating Instructions 1 Safety instructions 3 Please comply with thes e instructions. If you do not, any damage re- sulting is not covered by the warranty . 5 This appliance conforms with the following EU Dir ectives: – 73/23/EEC dated 19.02.1973 Low Voltage Dir ective – 89/336/EEC dated 03.
5 Safety during use • Overheated fats and oils can ignite very quickly . When cooking with fat or oil (e.g. chips) do not leave the ap pliance unattended. • Risk of burns! F at or oil added to a pan which has alr eady been heat- ed ignites very quickly and can spit.
6 Description of the Appliance Cooking surface layout Contr ol panel layout 300 mm Wok niche 2300W with power function 3200W Frontline strip Control panel Child lock pilot light Heat setting indicato .
7 T ouch Control sensor fields The appliance is operated using T ouc h Control sensor fields. Functions are controll ed by touching sensor fields. Touch the sensor fields fr om abov e, without covering other sensor fields.
8 Residual heat indicator 1 War ni ng ! Risk of burns from r esidual he at. After being switched off, the cooking zones need some time to cool down. Look at the r esidual heat indicator . 3 Residual heat can be used for melting and keeping food warm. Accessories Wok pan (sup plied) • 390 mm, 6 litr es • With 2 handles • WOK P 6.
9 Oper ating the appliance 3 Only use a wok pan that is suited to this appliance. Switching the appliance on and off 3 After switching on, within appr ox. 1 0 seconds a heat setting or a func- tion must be set, otherwise the appl iance automatically switches itself off.
10 Using the child safety device The child safety device prevents unintentional use of the app liance. Switching on the child safety device Deactivating the child safety device Overriding the child safety device The child safety device can be releas ed in this way for a single cooking session; it remains activated afterwar ds.
11 Using the timer Two functions are possible: Setting the time Switching timer function off Switching off the acoustic signal Function Condition Outcome after time has elapsed Safety cut-out When a h.
12 Changing the time Safety cut-out Cooking surface • If after switching on the cooking su rface, a heat setting is not set within approx. 1 0 seconds, the c ooking surface automatically switch- es itself off. • If the cooking zone is switched of f, the cooking surface automatically switches itself off after approx.
13 Tips for cooking with the wok The induction wok is eminently suit able for pr eparing “á la minute” dishes, in particular Chinese specialities. The food is continuously turned during the short frying ti me. The induction heating system means that in the wok you can cook extremely quickly and at high heat.
14 Cookwar e for induction cooking zones Cookware mat erial 3 Cookware for induction cooking zone s is labelled as suitable by the manufacturer . Suitability test Cookwar e is suitable fo r induction cooking, if … • ... a little water on an induction c ooking zone set to heat setting 9 is heated within a short time.
15 Methods of pr eparation in the wok Stir frying • Wok is swirled with oil. • Ingredients cut into small pieces, in cluding sauces and seasonings, are quickly fried over a high heat while continuously being stirred. • Due to the extr emely short cooking time the ingr edients should be ready befor e you start cooking.
16 Cleaning and Car e 1 Tak e c are ! Risk of burns from r esidual heat. 1 War ni ng ! Sharp objects and abrasive clea ning materials will damage the appliance. Clean with water and washing up liquid. 1 War ni ng ! Residues from cleaning agents will damage the appliance.
17 What to do if … Problem Possible cause Remedy The cooking zone canno t be switched on o r is not operating Mor e than 1 0 seconds ha ve passed since th e appliance was switch ed on Switch the applia nce on again.
18 If you ar e unable to r emedy the pro blem by following the above suggestions , please contact your dealer or the Customer Care De- partment. 1 War ni ng ! Repairs to the appliance ar e only to be carried out by quali- fied service engineers. Considerable danger to the user may r esult fr om improper r epair s.
19 Installation Instructions Safety instructions The laws, or dinances, directives and st and ard s i n f orc e in th e c oun tr y o f use are to be followed (safety r egula tions, proper r ecycling in accord- ance with the regulations, etc.) Installation may only be carrie d out by a qualified electrician.
20 • This appliance’s mains cable must be a special cable (type H05BB-F Tmax 90°; or higher). The latter is available from the Customer Care Department. A device must be pr ovided in the el ectrical insta llation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.
21 Assembly.
22.
23 Installing mor e than one Fr ontline hob Additional parts: cr oss bar(s), heat resistant silicon, rubber block, shav- ing blade. 3 Only use special heat-resistant silicon.
24 5. Place first appliance in the cut-ou t. Lay connecting cross bar in the cut-out and push up halfway ag ainst the appliance. 6. Put silicon on the appliance corners that will touch one another .
25 8. Place Frontline strips on the applianc es. Check that the Fr ontline strips are in line with one another . 9. Tighten the fixing plate / retaining grip screws. 10 . Inject a line of silicon into the gap between the appliances. 11 . Dampen silicon line with a little soapy wate r .
26 Overview of all appliance widths 180 mm Worktop-mounted cooker hood 360 mm Glass ceramic cooking surface wi th 2 radiation cooking zones Glass ceramic cooking surface with 2 induction cooking zones.
27 Rating Plate 94 1 177 66 1 220-240 V 3,2 kW 59 WOK 0 1 AG FM4863-an 50/60 AEG-ELECTROLUX.
28 Guar antee Conditions Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are pr oduced with the greatest of care. However , a defect may still occur . Our con- sumer services department will repair this upon r equest, eith er during or after the guarantee peri- od.
29 withstand the local climatic and environmental co nditions. For appliances purchased abroad, the user must first ensur e that they meet the qualific ations required in Belgiu m. Non-essential or re- quested adjustments ar e not cover ed by the guar antee and ar e not possib le in all cases.
30 Hellas +30 23 1 0 56 19 7 0 4 Limnou Str ., 54627 Thessalonik i Hrvatska +385 1 63 23 338 Slav onska avenija 3, 1 0000 Zagreb Ireland +353 1 40 9 0 753 Long Mile Road Dublin 12 Italia +39 (0) 434 5 58500 C.so Lino Zanussi, 26 - 3308 0 P orcia (PN) Latvija +37 17 84 59 34 Kr.
31 Service In the event of technical faults, please first check whether you can remedy the pr oblem yourself with the help of the oper ating instruc- tions (section “What to do if…”). If you were not able to r emedy the problem your self, please contact the Customer Care Department or one of our service partners.
www.electrolux.com 315 8 40 503 - A-1509 0 6-01 Subject to change without notice.
An important point after buying a device Electrolux FM4863-an (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux FM4863-an yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux FM4863-an - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux FM4863-an you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux FM4863-an will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux FM4863-an, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux FM4863-an.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux FM4863-an. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux FM4863-an along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center