Instruction/ maintenance manual of the product FIDW 41 Electrolux
Go to page of 20
INSTR UCTION BOOKLET UK DISHW ASHER FID W 41.
2 Safety instructions 3 Disposal 3 Economical and ecological dishwashing 3 Description of the appliance 4 The control panel 4 Prior to using for the first time 5 Setting the water softener 5 Filling w.
3 Installation ● Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier . ● For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way .
4 The control panel Description of the appliance 1. Upper basket stop 2. W ater hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11 . Upper basket 12.
5 Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4.
6 Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
7 ● Check if it’s necessary to refill with special salt or rinse aid ● Load cutlery and dishes into the dishwasher . ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme.
8 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the cup racks.
9 Use of detergent Only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme (not for the "Rinse and Hold" programme).
10 W ashing programmes Programme Degree of soil and type of load Starting position of the programme selector dial Normal soil Crockery , cutlery , pots and pans Normal soil Crockery and cutlery Any .
11 In this fully integrated appliance the controls are located on the top of the door . When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. T urn on the water tap 3.
12 Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
13 Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer . ...there are problems when operating the dishwasher The dishwasher will not start or stops during operation.
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
15 Standard Guarantee Conditions We, EHP , undertake that if within 12 months of the date of purchase this Firenzi appliance or any part thereof is proved to be defective by reason only of faulty work.
16 Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.
17 Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
18 T esting in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "W ashing programmes" chart).
.
Subject to change without notice 0 09/03 152967 32/0.
An important point after buying a device Electrolux FIDW 41 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux FIDW 41 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux FIDW 41 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux FIDW 41 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux FIDW 41 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux FIDW 41, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux FIDW 41.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux FIDW 41. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux FIDW 41 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
