Instruction/ maintenance manual of the product FAVORIT 44080 i Electrolux
Go to page of 40
FAVORIT 44080 i Dishwasher User information.
2 Dear Customer , Please r ead this user information car efully and keep it to r efer to later . Please pass the user information on to any future owner of the appli- ance. The following symbols ar e used in the text: 1 Safety instructions War n i n g ! Information that affects your personal safety .
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Diagra m of Appliance .
4 Oper ating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for install ation and connect ion” . Corr ect Use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher ar e not permitted.
5 Diagr am of Appliance Contr ol P a nel The ON/OFF button is used to turn the dishwasher on and off. Top Spr ay Nozzle Upper basket spray arm and lower spray arm Water softener unit.
6 The Pr ogramme buttons are used to select the desir ed dishwashing cy- cle. Function buttons : In addition to the pre-set dishwashing cycle, the following functions can also be set using these buttons: Progr amme progr ess display : The current stage of the pr ogramme is always shown in the pr ogramme pr ogr ess display .
7 Prior to Using for the First Time 3 If you wish to use 3 in 1 detergent: – F i rs t re ad t h e s ec t i o n “U s i n g 3 i n 1 d et e rg e n ts ” . – Do not fill up with special salt or rinse aid. If you do not use 3in1 detergent, befor e using for the first time 1.
8 3. Press function button 1 . The LED indicator for function butt on 1 will flash. The LED indicator for the end of the dishwashing cycle will flash simul- taneously: – The number of times that the LED indicator for th e end of the dish- washing cycle flashes corresponds to the hardness setting.
9 Adding dishwasher Salt To decalcify the water softener , it mu st be filled up with dishwasher salt. Use only special salt suitable for domestic dis hwashers. If you do not use 3 in1 detergent, fill up with dishwasher salt: – Before usin g the dishwasher for the first ti me.
10 Filling Up with Rinse Aid Rinse aid causes the rinse water to fl ow easily from the cr ockery leav- ing gleaming dishes and glassware. If you do not use 3in1 detergent, fill up with rinse aid: – Before usin g the dishwasher for the first ti me. – When the control indicator for rinse aid is illuminated on the contr ol panel.
11 Setting the Amount of Rinse Aid Requir ed 3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (inc rease the amount) can be seen on glasses and dishes. (See section “If di shwashing results are not satisfac- tory” .
12 In daily use Loading cutlery and dishes 1 Sponges, cleaning cloths and any ot her objects that ca n absorb water must not be washed in the dishwash er . Plastic and Teflon-coated dishes and pans tend to r etain water dr oplet s. These dishes an d pans therefor e do not dry as well as those made of china and stainless steel.
13 Loading cutlery 1 War n i n g : Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery r ack or in the upper basket to avoid the risk of injury .
14 To make it easier to load lar ger dish- es, the two plate racks on the right in the lower basket can be folded down. Cups , Glasses , Coffee Service Load smaller , fr agile crockery a nd long, sharp cutlery in the upper bas- ket.
15 Adjusting the Height of the Upper Basket 3 The height of the baskets can also be adjusted when they are loaded. Raising / Lowering the upper bas- ket 1. Pull out the upper basket complete- ly . 2. Holding the upper basket by the handle, ra ise it as far as it will go and then lower it vertically .
16 2. Place the detergent in the deter gent dispenser . The mark ings indicate the dosing levels for powder deter gents: “20/30” corresponds to appr ox. 20/30 ml of detergent. Follow the manufacturer’ s instruc- tions with regar d to dosing and storage.
17 Using 3in1 deter gents These products ar e deter gents with a combined cleaning, rinsing and salt function. When the 3in1 functi on is activated, – the addition of special salt and rins e aid fr om the r espective dispenser is prevented. – If the salt and rinse aid dispensers are empty , this is not indicated.
18 Selecting the dishwash ing cycle (Cycle T able) Dishwashing- cycle Suitable for: Type of soiling Progr amme sequence Consumption values 1) 1) The consu mption values were obtained under standardised conditions. They depend on how full the baskets for th e dishes are.
19 Selecting a pr ogr amme When your dishes look like this, select: an intensive progr amme. a normal or energy-saving pr o- gramme. a short progr amme (e.
20 Starting a Dishwashing Cycle 1. Check that the spray arms can turn fr eely . 2. Turn the water tap on fully . 3. Close the door . 4. Press the ON/OFF button. 5. Select the desired cycle. The progr amme display lights up. The selected cycle will begin after ap- proximately 3 seconds.
21 3. Select dishwashing cycle. The LED indicator for the progr amme se lected and the indicator next to the number of hour s will light up. The dishwashing cycle will start automatically following a countdown of the hours set.
22 Car e and cleaning 1 Do not use furniture care pr odu cts or aggressive cleaner s. • When necessary , clean the dishwasher ’s contr ols with a soft cloth. • Occasionally check the internal di spenser s, door seal and water inlet filter (if fitted) for dirt and clean them, if necessary .
23 5. Remove the flat filter (3) fr om the base of the washing compartment and clean both surfaces thor oughly . 6. Re-insert the flat filter . 7. Place the fine filter in the micro-fil- ter and fit the two together . 8. Insert the filter system in place and lock it by turning the handle clock- wise as far as it will go.
24 3. Place cleaned upper basket spray arm back in position against the connect- ing piece: press the two together firmly , until you feel them snap into place. Bottom spray arm 1. To r emove bottom spray arm, pull it upwards out of its catch. 2. Clean spray arm jets.
25 What to do if... Remedying small malfunctions If while the appliance is operating indicator s on the control panel flash or are lit up as described in the foll owing table, please consult th is to find out how to r emedy the fault.
26 the indicator for th e end of the dishwashing cycle is flashing in sequence 3 short light signals on e after ano th- er . The anti-flood system has been trigger ed. Turn off the tap and contact the Serv ice Force Centre. The cycle is not starting .
27 If the Dishwashing Results ar e not Satisfactory The dishes are still dirty . • The wrong dishwashing cycle was selected. • The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overload- ed.
28 Disposal 2 Packaging material The packaging materials are envir onmentally friendly and can be r ecy- cled. The plastic components are id entified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pa ckaging materials in the appropriate container at your local waste disposal facilities.
29 T echnical Data 5 This appliance conforms with the following EU Dir ectives: – 73/23/EEC dated 19.02.1973 Low Voltage Dir ective – 89/336/EEC dated 03.05.1989 EMC Dire ctive inclusive of Amending Directive 92/3 1/EEC – 93/68/EEC dated 22.0 7.
30 Notes for T est Institutes Testing in accor dance with EN 60 7 04 must be carried out with the appliance fully loaded and using th e test cycle (see “Cycle T able”).
31 Lower basket with cutlery basket *) Cutlery basket *) If there are cup r acks in place on the lef thand side or if beer glass holders are in place, remove them.
32 Installation and connection instructions 1 Safety Information for the Installation • Only tr ansport the dishwasher in an upright position, otherwise salt water may run out. • Before using th e dishwasher for the firs t time, check for any damage caused in transport.
33 Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all dir ections. • To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units, extend the thr ead- ed feet using a screwdriver .
34 Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connect ed to open hot water appliances or instantaneous water heater s.
35 W ater drainage Drain hose 1 The drain hose must not be kinked, crushed or entangled. Connecting the drai n hose: – Maximum permitted height: 1 metre. – Minimum requir ed height: 40 cm above the bottom edge of the ap- pliance. Extension hoses • Extension hoses are available fr om your local Service Force Centr e.
36 Electrical Connection Any electrical work required to install this appliance should be car- ried out by a qualified elec trician or competent person. 1 WARNING - This appliance must be earthed. The manufacturer declines any r esp onsibility should these safety measures not be observed.
37 Connecting systems The water inlet hose, drain hose and the mains cable must all be con- nected to the side of the dishwasher as there is no space for them be- hind the appliance.
38 W arr anty conditions Gr eat Britain Standard guar antee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG applian ce or any part thereof is proved to be d.
39 Service and Spar e P arts If the event of your appliance requir ing service, or if you wish to pur- chase spare parts, please contac t Service For ce by telephoning: Y our telephone call will be automatically r outed to the Ser vice For ce Centre covering your post code ar ea.
From the Elec trolux Gr oup . The world´s No.1 choice. The Electrolux Group is the world´s largest pr oducer of powered appliances for kitchen, cleaning and outdoor use.
An important point after buying a device Electrolux FAVORIT 44080 i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux FAVORIT 44080 i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux FAVORIT 44080 i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux FAVORIT 44080 i you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux FAVORIT 44080 i will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux FAVORIT 44080 i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux FAVORIT 44080 i.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux FAVORIT 44080 i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux FAVORIT 44080 i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
