Instruction/ maintenance manual of the product EW 1280F Electrolux
Go to page of 26
Fr ont Load W asher Instruction Booklet EW 1 2 80F 132990380.
2 Content s Operating sequence 15-17 Washing programmes 18 International wash code symbols 19 Maintenance 20 After each wash 20 Maintenance wash 20 Door seal 20 Cabinet 20 Detergent dispenser drawer 2.
3 Inst allation • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All internal packing must be removed before using the appliance.
T echnical specifications 4 Disposal T ip s for environment al protection Packaging materials The materials marked with the symbol are recyclable. >PE< =polyethylene >PS< =polystyrene >PP< =polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
5 Inst allation Unp acking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the two rear bottom screws.
6 The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. W ater drainage The end of the drain hose can be positioned in four ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine .
7 Y our new washing machine This new washing machine, which is fitted with the New Jet System, patented Electrolux, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption.
8 Use 1 24 35 6 7 8 9 1 01 11 2 Prewash Quick Wash Prewash Wash Rinses Spin Drain Cold Night Cycle 1200 900 700 500 Delicates 60 °C 40 °C 95 °C 30 °C Wool On/Off Cottons Synthetics FABRICS TEMPERA.
9 To complete the cycle, choose one of the following options: • Draining and spin: - Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - Select spin speed by means of button 5, and press the START/PAUSE button.
• The washing machine has stopped with water in tub , at the end of a programme with NIGHT CYCLE option: this is indicated by a static zero . • The washing machine has completed the programme : this is indicated by a blinking zero .
11 10 SKIP RESET button This button performs two functions: - Clears the memory - Selects special programmes At the end of every programme the RESET button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display.
12 1 1 DELA Y ST ART button This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. If the button SOAK has been pressed the selected delay will correspond to the soak time.
13 W ashing hint s Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. T emperatures 90°-95° for normally soiled white cottons and linen (e.
14 If a dosage ball/device is supplied with your concentrate detergent, measure the detergent into the device/ball which should then be placed on top of the laundry and at the back of the machine drum. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme.
15 Operating sequence Before the first wash we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
16 6. Select the temperature Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up. 7. Select the SPIN SPEED or the NIGHT CYCLE option Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the NIGHT CYCLE option.
17 1 1. How to change a programme during it s cycle Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only during the washing phase.
18 * Dispenser- washing agents Description Type of laundry and degree of soil Programme/ temperature Possible options Wool Specially tested programme for wool garments bearing the “Pure new wool, non-shrink, machine washable” label.
19 International wash code symbols These symbols appear on f abr ic labels, in order to help you choose the best w ay to treat y our laundr y . Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max.
20 Maintenance Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Af ter each wash Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance.
21 Drain pump The pump should be inspected if • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: • Disconnect the appliance.
22 The dangers of freezing If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: • Remove the plug from the socket.
23 T rouble-Shooting Guide Problem Possible cause Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out a service technician. Before contacting your local Service Centre, please carry out the checks listed below.
24 If you are unable to identify or solve the problem, contact your nearest service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. .........
25 ELECTROLUX APPLIANCE W ARRANTY – NEW ZEALAND This appliance is warranted by Electrolux Home Products (NZ) Ltd (“the Company”) from the date of purchase.
ELECTROLUX W ARRANTY AUSTRALIA Nothing in this warranty, limits any rights you may have under the Trade Practices Act or any other Commonwealth or State legislation. Such rights cannot be changed by the conditions in this warranty. Subject to the conditions below, this appliance is warranted by Electrolux Home Products Pty.
An important point after buying a device Electrolux EW 1280F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EW 1280F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EW 1280F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EW 1280F you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EW 1280F will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EW 1280F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EW 1280F.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EW 1280F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EW 1280F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
