Instruction/ maintenance manual of the product ESL 6114 Electrolux
Go to page of 16
Dishwasher Instruction book Model ESL 6114 UK 0 01/03.
The control panel 2 1. W ater hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11 . Central filter 12. Upper spray arm 13.
3 Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely .
In this fully integrated appliance the controls are located on the top of the door . When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. T urn on the water tap 3.
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.
6 In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area.
7 T esting in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "W ashing programmes" chart).
The Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
1 Instruction Book - Before use - Maintenance - Installation Contents Before use 2 Setting the water softener 2 Filling with salt 2 Filling with rinse aid and adjusting the dose 3 Use of detergent 3 H.
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
4 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an enginee r. Before contacting your local Service Force Centre, please carry out the checks listed below .
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine.
Subject to change without notice 5 01/03 152981 19/5 This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low V oltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
An important point after buying a device Electrolux ESL 6114 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux ESL 6114 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux ESL 6114 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux ESL 6114 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux ESL 6114 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux ESL 6114, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux ESL 6114.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux ESL 6114. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux ESL 6114 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
