Instruction/ maintenance manual of the product ESF 46710 Electrolux
Go to page of 28
user manual Dishwasher ESF 46710.
Electrolux. Thinking of you. Share more of our thinki ng at www.electrolux.com Contents Safety information 2 Product description 4 Control panel 5 First use 6 Set the water softener 6 Use of dishwashe.
• Dishwasher detergents can cause chemi- cal burns to eyes, mo uth and throat. Could endanger life! Comply with the safety in- structions of the di shwasher detergent manufacturer. • Water in the dishwash er is not for drinking purposes. Detergent residue may still be present in your machine.
Product description 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm 10 Worktop 4 electrol.
Control panel 1 On/Off button 2 Programme sele ction butto ns 3 Delay start button (Delay) 4 Indicator lights 5 Digital display 6 Function buttons Indicator lights Programme in progress Comes on when a washin g programme is set and remains on for all the duration of the washing pro- gramme.
• the approximate remaining time of the run- ning programme, • activation/deactivation of the rinse aid dis- penser ( ONLY with 'Multitab function ' ac- tive), • the end of a washing programme (a zero will appear in the digital display), • the countdown for the delay start, • fault codes concerning malfunction of the dishwasher.
Water hardness Adjusting the wat er hardness setting Use of salt °dH °TH mmol/l manually electron ically 37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes 29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes 23 - 28 40 - .
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clock- wise until it stops with a click. Do not worry if water overflows from the unit when filling with salt, this is quite normal.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades. Daily use • Check if it’s necessary to refill with dish- washer salt or rinse aid. • Load cutlery and dishes into th e dishwash- er. • Fill with dishwasher detergent.
Load cutlery and dishes The lower basket The lower basket is designed to take sauce- pan, lids, plates, salad bowls, cutlery ect. Service dishes and larg e lids should be ar- ranged around the edge of the basket, en- suring that the spray arms can turn freely.
For best results we r ecommend that you use the cutlery grid. If the size and dimensions of the cutle ry do not allow the use of the grid, it can be easily hidden.
The dimensions of the cutlery depend on the position of the upper basket. Refer to the fol- lowing table. Cutlery dimensions fo r mini cutlery b asket Upper basket in higher position maximum 15 cm Upp.
2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable. To lower the basket to the original posi- tion proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it.
4. Close the lid and pr ess until it locks in place. Detergent tablets from different manu- facturers dissol ve at different rates. For this rea son, some detergent tablets do not attain their full cleaning power during short washing prog rammes.
Rinse aid dispenser activated 4. To change the sett ing, press button B again, the digital display indicates the new setting. 5. To memorize the operation, switch off the dishwasher by pressing the On/Off but- ton. If you decide to revert back to the use of individual detergents w e ad- vise that you: 1.
Cancel a delay start or a washing programme in progress • Simultaneously press and hold the two function buttons B and C until all the pro- gramme lights come on. • Cancelling a delay start will also cancel the washing programme. You have to select the washing programme again.
Programme Degree of s oil Type of load Programme descripti on Glass Normal or light soil Delicate crockery and glassware Main wash up to 45°C 1 intermediate rinse Final rinse Drying 1) During the Auto programme, the soil level of th e dishes is given by how cloudy th e water is.
7. Put the flat filter b ack in the base of the washing compartment and ensure that it fits perfectly. 8. Place the coarse filter ( A ) in the microfil- ter ( B ) and press together. 9. Put the filter combination in place and lock by turning the handle clockwise to the stop.
Fault codes and malfunction Possible ca use and solutio n • continuous flashing of the light of the running programme • digital display shows The dishwasher d oes not fill with wat er • The water ta p is blocked or furred with l ime- scale. Clean the water tap.
The wash result s are not sati sfactory The dishes are not clean • The wrong programme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts of a surface. The baskets must not be overlo aded. • The spray arms do not rotat e freely due to incorrect arrangement of the load.
Arrangement upper basket without salad-bow Arrangement upper basket with salad- bowl Cup racks: position A Arrangement lower basket Arrangement cutlery basket Installation Warning! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified el ectrician and/or plumber or competent person.
By removing the mach ine's worktop, you can install it under a close fitting sink unit or a pre- existing top, providing the dimensions of th e recess correspond to those shown in the picture.
locknut. The locknut must be correctly fitted to avoid water leaks. Attention! NOT all di shwasher models of have inlet and drain hoses provided with a locknut.
Our appliances are supplied with a se- curity device to prot ect against the re- turn of dirty water b ack into the machine. If the spigot of your sin k has a "no retu rn valve" incorporated this can prevent the correct draining of your dishwasher.
electrolux 25.
26 electrolux.
electrolux 27.
117959480 - 00 - 102008 www.electrolux.com.
An important point after buying a device Electrolux ESF 46710 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux ESF 46710 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux ESF 46710 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux ESF 46710 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux ESF 46710 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux ESF 46710, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux ESF 46710.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux ESF 46710. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux ESF 46710 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
