Instruction/ maintenance manual of the product 9CHG584162 Electrolux
Go to page of 28
therma line S90 FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne déposez pas ou n'employez pas l'essence ou d'autres vapeurs ou liquides inflammables à pro - ximité de ceci ou d'aucun autre appareil.
Doc. 62.9534.01_UL Against wall - contre une paroi Free standing - isolé Connections - Raccordement Gas - Gaz Fig.1 INSTALLATION DRAWINGS - PL ANS D'INSTALLATION.
Doc. 62.9534.01_UL Free standing - isolé Base operated from bo th sides - base ulilisable des deux côté s Connections - Raccordement Gas - Gaz Fig.1 INSTALLATION DRAWINGS - PL ANS D'INSTALLATI.
Doc. 62.9534.01_UL.
62.9534.01_UL Page 1 CONTENTS I. GENERAL INFORMA TION .............. ................ ................ ................ .................... ............... 3 II. INSTALLATION INSTRUCTION S.... ................... ................ ....................
Page 2 62.9534.01_UL.
GENERAL IN FORMATIO N 62.9534.01_UL Page 3 I . GENERAL INFORMATION 1. INSTRUCTIONS FOR SAFETY AND USE 1.1 INSTALLATION AND INITIAL OPERATION 1.2 OPERATOR'S OBLIGATIONS 1.
GENERAL INFORMATION Page 4 62.9534.01_UL 1.5 AFTER-SALES SERVICE AND REPAIR 2. TECHNICAL DATADATA 3. GAS CONSUMPTION 4. PACKAGING All the packaging materials used are environ mentally friendly. They may burnt at an incineration plant or sent for recycling.
INSTALLATION INSTRUCTIONS 62.9534.01_UL Page 5 II . INSTALLATION INSTRUCTIONS 1. INSTALLATION The applia nce is designed for conne ction to fixed li nes.
INSTALLATION INSTRUCTIONS Page 6 62.9534.01_UL 1.4 SIDEWALL (D) The assembly kit contains two of each of the following: hexagonal screws M8x25 (1 / Fig.1), bo lts with retaining rings (2 / Fig.1), mounting links (3 / Fig.1), hexagon al screws M8x16 with serrated washers and hexagonal nuts M8, hexagonal screws M5 with serrated washers (4 / Fig.
INSTALLATION INSTRUCTIONS 62.9534.01_UL Page 7 2.1 FRONT PANELS (A) and (B) D Unscrew screws (1 or 3). Also, in the case of a built-in oven, unscrew screws (2 and/o r 4) o n th e i nsi de of th e o v en . D Pull the panel aw ay forwards and downward s.
INSTALLATION INSTRUCTIONS Page 8 62.9534.01_UL 4. GAS CONNECTION The installation of the g as connection, as well as the laying of the customer's gas line, is only to be carried ou t by an author- ised specialist subject to the relevan t national and local regula- tions.
OPERATING INSTRUCTIONS 62.9534.01_UL Page 9 III . OPERATING INSTRUCTIONS 1. GENERAL An 840 x 740 mm solid top with a burner output of 2 x 7 kW can reach a maximum temperatur e of 842°F (450°C) in the area of the burner. The base unit is equipped with a h ygienic area or with a g as roasting and baking oven.
OPERATING INSTRUCTIONS Page 10 62.9534.01_UL 3.1 GAS BURNER So far as is necessary, the pilot burner and main burner are cleaned by after-sa l es se rvi ce. 3.2 FLAME In a visual check, the flames must be dark blue without any upper yellow or o range tips; they must b e stable and soot-free and adhere firmly to the outlets.
OPERATING INSTRUCTIONS 62.9534.01_UL Page 11 6. GAS-OPERATED ROASTING AND BAK ING OVEN The roasting and baking oven is in tegrated in t he base unit of the range. Th e oven eq uipment include s: - remova b le grid gu i des - grid and trays The base of the ove n is made of a thick steel plate which dis- tributes and stores the heat even ly.
OPERATING INSTRUCTIONS Page 12 62.9534.01_UL 6.4.2 BURN ER CHAMBER D Remove the base plate grid guide (1 / Fi g. 13). D The burner chamber, g rid guide and the interior should be washed with hot wate r to which a normal, fat-dissolving agent has been added, and then dried.
INSTRUCTIONS GÉNÉRALES 62.9534.01_UL Page 13 I . INSTRUCTIONS GÉNÉRALES 1. CONSIGNES DE SÉ CURI TÉ ET D'UTILISATION 1.1 INSTALLATION ET MISE EN SERVICE 1.
INSTRUCTIONS GÉNÉRALES Page 14 62.9534.01_UL 1.5 SERVICE-APRÈS-VENTE ET RÉPARATION 2. DONNÉES TECHNIQUES 3. CONSOMMATION DE GAZ 4. EMBALLAGE Tous les matériaux d'emba llage utilisés sont non polluants. Ils peuvent être brûlés dans une installation d'incinération ou recyclés.
INSTRUCTIONS RELATI VES À L'INSTALLATION 62.9534.01_UL Page 15 II . INSTRUCTIONS RELATIVES À L'INSTALLATION 1. MISE EN PLACE Cet appareil est conçu pour être raccordé à des conduites fixes. Les appareils p euvent être montés individuellemen t ou en groupe.
INSTRUCTIONS RELATIVES À L'INSTALLATION Page 16 62.9534.01_UL 1.4 PAROI LATERALE (D) Chaque kit d'assemblage comprend re spectivement deux vis hexagonales M8 x 25 (1 / Fig.
INSTRUCTIONS RELATI VES À L'INSTALLATION 62.9534.01_UL Page 17 2.1 PANNEAU AVANT (A) et (B) D Desserrez les vis (1 et 3 Fig. 5, Fig.6). Si le four est encastré, desserrez D Extrayez le panneau vers l'avant et le bas. 2.2 PANNEAU DE COMMANDE (C) D Enlever l'interrupteur rotatif.
INSTRUCTIONS RELATIVES À L'INSTALLATION Page 18 62.9534.01_UL 4. RACCORDEMENT AU GAZ Le raccordement au gaz, de même que la pose de la conduite d'arrivée de gaz doivent être réalisés exclusivement p ar un spécialiste agréé, dans le resp ect des dispositions nationales et locales en vigueur.
INSTRUCTIONS DE FONCTIONN EMENT 62.9534.01_UL Page 19 III . INSTRUCTIONS DE FONCTIONNEMENT 1. GRANDE ZONE DE CUISSON À GAZ 1.1 Donnée s générales Une grande zone de cuisson d e 840 x 740 mm peut produire une température maxima le de 842°F (450 °C) au niveau des brûleurs, à une puissance de chauffe de 2 x 7 kW.
INSTRUCTIONS DE FONCTIONNEMENT Page 20 62.9534.01_UL D Nettoyez le sol tout auto ur de l'appareil selon la méthode traditionnelle, à savoi r sans utiliser d'appareil de nettoyage sous pression.
INSTRUCTIONS DE FONCTIONN EMENT 62.9534.01_UL Page 21 5. FOUR À GAZ POUR CUIRE ET RÔTIR Le four est intégré dans la partie inférieure de la cuisinière.
INSTRUCTIONS DE FONCTIONNEMENT Page 22 62.9534.01_UL Démontage : D Retirez la plaque de la sole du four (1 / Fig. 13). D Soulevez la couli sse de support des grilles (2 / Fig. 13) et extrayez-la de la coul isse (3 / Fig. 13). Montage : Pour le montage, procédez dans le sens inverse.
62.8504.09 T able of nozzle - T ableau de gigleur therma line S90 Solid T op (7.6 kW) Gas type ±1% Nominal pres - sure with burner in operation ±1% Pressure af ter the pressure regulator w ith burner in opera - tion Category Main flame Small flame Ignitions burne r Air adjustment Distance X inch Water Gauche mbar inch W ater Gauche mbar in mm No.
62.8504.10 T able of nozzle - T ableau de gigleur therma line S90 Rosting oven (7.6 kW) Gas type ±1% Nominal pres - sure with burner in operation ±1% Pressure af ter the pressure regulator w ith bur.
An important point after buying a device Electrolux 9CHG584162 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux 9CHG584162 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux 9CHG584162 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux 9CHG584162 you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux 9CHG584162 will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux 9CHG584162, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux 9CHG584162.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux 9CHG584162. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux 9CHG584162 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
