Instruction/ maintenance manual of the product 60C Alamo
Go to page of 74
©2010 Alamo Group Inc. $0.00 60C Pu bl is h ed 0 1/ 10 Pa rt No . F-4163C OPERA T OR’S MANUAL ALAMO (SMC) 300 East 60th S treet North Sioux Falls, South Dakota 57101 (605) 336-3628 info@alamo-smc.com BACKHOE This Opera tor's Manual is an in tegral part of the safe operation of this machine and must be maintained with the unit at all times.
T O THE OWNER/OPERA T OR/DEALER All implements with moving p arts are potentially hazardou s. There is no substitute for a cautious, safe-minded operator who re cognizes the potential hazards and follows reasonable safety practice s.
T ABLE OF CONTENTS SAFETY SECTION ................ ................... ....................... ................... ....................... ............ .............. . 1-1 General Safety Instruct ions and Prac tices ............... ..................
RIGHT HAND STABI LIZER ...................... .................... ...................... .................... ................. 3-3 OPERATING BACKHOE ....... ...................... .................... ................... ....................... ....
Safety Section 1-1 SAFETY SECTION.
SAFETY 60C 01/10 Safety Section 1-2 © 2010 Alamo Group In c. SAFETY General Safety Instructions and Practices A careful operator is the best opera tor .
SAFETY 60C 01/10 Safety Section 1-3 © 2010 Alamo Group In c. SAFETY N ever opera t e th e T rac t or or I mp l emen t un til you h ave rea d an d completely under stand this Manual , the T ractor Operator ’ s Manual, and each of the Safety Messages found in the Manual or on the Tr actor and Implement.
SAFETY 60C 01/10 Safety Section 1-4 © 2010 Alamo Group In c. SAFETY Never run the T ractor eng ine in a closed building or without adequate ventilation.
SAFETY 60C 01/10 Safety Section 1-5 © 2010 Alamo Group In c. SAFETY Connecting and Disconnecting Safe ty Instructions and Practices U se cau ti on an d wear pro t ec ti ve g l oves w h en h an dli ng s h arp o bj ec t s suc h as bl a d es, knives, and o ther cutting edges.
SAFETY 60C 01/10 Safety Section 1-6 © 2010 Alamo Group In c. SAFETY Equipment Operation Safety Instructions and Practices Make sure the hy draulic quick discon nects are fu lly seated into the connections. Do not u se the Backhoe if the hydraulic connection is le aking .
SAFETY 60C 01/10 Safety Section 1-7 © 2010 Alamo Group In c. SAFETY S tart tr actor only when properly seated in the T ractor seat. S tarting a tractor in gear can resu lt in injury or death. Read the T ractor operators manual for prop er starting instructions .
SAFETY 60C 01/10 Safety Section 1-8 © 2010 Alamo Group In c. SAFETY Operate the tractor and Backho e only in conditions where you have clear visibility in daylight or with adequate artificial lighting. Never operate in darkness or fogg y conditions where you cannot clearly see at least 100 fe et in front and to the sides of the tractor .
SAFETY 60C 01/10 Safety Section 1-9 © 2010 Alamo Group In c. SAFETY N ever wa lk or wor k un d er any ra i se d b oom or b uc k e t . Th e B oom cou ld f a ll an d cause serious bodily injury or dea th. Always lowe r the boom and bucket flat on the groun d or support the Boom and bucket on safety stands.
SAFETY 60C 01/10 Safety Section 1- 10 © 2010 Alamo Group In c. SAFETY Do not work from the backhoe or att achments. Do now allow any riders on the backhoe, tractor or attachments.
SAFETY 60C 01/10 Safety Section 1-11 © 2010 Alamo Group In c. SAFETY T ransporting Safety Inst ructions and Practices BEFORE leaving the tractor sea t, always set the parkin g brake and/or set the tractor transmission in parking ge ar , disengage the PTO, stop the engine, remove the key , and wait for all moving p arts to stop.
SAFETY 60C 01/10 Safety Section 1- 12 © 2010 Alamo Group In c. SAFETY D o no t d r i ve near th e e d ge o f a dit c h or excava ti on. Th e so il cou ld g i veway resu lti ng i n loss of control or rollover . (SBH-46 ) U se ex t ra care w h en t urn i ng or s t opp i ng.
SAFETY 60C 01/10 Safety Section 1-13 © 2010 Alamo Group In c. SAFETY Storage Safety Instru ctions and Practices Maintenance Safety Inst ructions and Practices Always look behind you before backing up. Make sure you are looking in the direction of travel.
SAFETY 60C 01/10 Safety Section 1- 14 © 2010 Alamo Group In c. SAFETY Concluding Safety Inst ructions and Practices Periodically inspect all moving part s for wear and replace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p arts, and leaky or loose fittings.
SAFETY 60C 01/10 Safety Section 1-15 © 2010 Alamo Group In c. SAFETY Decal Location.
SAFETY 60C 01/10 Safety Section 1- 16 © 2010 Alamo Group In c. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 44897 2 DANGER Crushing Haza rd 2. 54687 1 LOGO 60C (Sma ll) 3. 54686 2 LOGO 60C (B ig) 4. NFS 1 SER PL T Serial Plate 5. 38850-2 2 ________ Rivet, Metal Pie rcing (Not Shown) 6.
SAFETY 60C 01/10 Safety Section 1-17 © 2010 Alamo Group In c. SAFETY Decal Description 8 -- 44901 9 -- 44900 6 -- 44909 7 -- 44908 3 -- 54686 17 -- 52154 10 -- 4489 9 1 1 -- 44898 2 -- 54687.
SAFETY 60C 01/10 Safety Section 1- 18 © 2010 Alamo Group In c. SAFETY 15 -- 4489 6 14 -- 4597 0 16 -- 44895 1 -- 44897 13 -- 44907 12 -- 48280 Note: Safety decal location is listed below each decal. Replace decal if damaged or illegible. Replacement decals are available from dealer .
SAFETY 60C 01/10 Safety Section 1-19 © 2010 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in broad term s the concept and effect of federal laws an d regulations concerning emplo yer and employee equipment o perat ors.
.
Introduction Section 2-1 INTRODUCTION SECTION.
INTRODUCTION 60C 01/10 Introduction Section 2-2 © 2010 Alamo Group Inc. INTRODUCTION Alamo SMC C Series Backhoes are de signed to provide year s of ou tst anding se rvice. C Series Backhoes are designed to fit on a wide ran ge of compact and utility class tractors oper ating in a wide range of conditions.
INTRODUCTION 60C 01/10 Introduction Section 2-3 © 2010 Alamo Group Inc. INTRODUCTION SPECIFICA TIONS S pecifications may vary depending on tractor model, ti re size and bucket used and are subject to chang e without notification.
INTRODUCTION 60C 01/10 Introduction Section 2-4 © 2010 Alamo Group Inc. INTRODUCTION.
Assembly Section 3-1 ASSEMBL Y SECTION.
ASSEMBLY 60C 01/10 Assembly Section 3-2 © 2010 Alamo Group Inc. ASSEMBL Y MOUNTING BACKHOE T O TRACTOR 1. Back tractor close enough to backhoe to connect h ose kit or pump to tractor .
ASSEMBLY 60C 01/10 Assembly Section 3-3 © 2010 Alamo Group In c. ASSEMBL Y.
ASSEMBLY 60C 01/10 Assembly Section 3-4 © 2010 Alamo Group Inc. ASSEMBL Y P ARTS LIST Mainframe Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-5 © 2010 Alamo Group In c. ASSEMBL Y Mainframe Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54712 1 CONSOLE W/ DECALS 2. 53717 1 COVER PLA TE 3. 54457 2 ST ABILIZER 4. 53707 2 P AD, ST ABILIZER 5. 47272 2 CYLINDER ST ABILIZER 6.
ASSEMBLY 60C 01/10 Assembly Section 3-6 © 2010 Alamo Group Inc. ASSEMBL Y Mainframe Assembly w/o Seat.
ASSEMBLY 60C 01/10 Assembly Section 3-7 © 2010 Alamo Group In c. ASSEMBL Y Mainframe Assembly w/o Seat Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54712 1 CONSOLE W/ DECALS 2. 53717 1 COVER PLA TE 3. 54457 2 ST ABILIZER 4. 53707 2 P AD, ST ABILIZER 5.
ASSEMBLY 60C 01/10 Assembly Section 3-8 © 2010 Alamo Group Inc. ASSEMBL Y Swing Frame Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-9 © 2010 Alamo Group In c. ASSEMBL Y Swing Frame Assembly ITEM P ART NO. QTY DESCRIPTION 1. 54496 1 CYLINDER, SWING 2. 54448 1 SWING FRAME 3. 41838-28 3 SCREW , CAP 5/16-18 X 2 GR5 4. 41840-3 2 NUT , LOCK 3/8-16 5.
ASSEMBLY 60C 01/10 Assembly Section 3-10 © 2010 Alamo Group Inc. ASSEMBL Y Boom Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-11 © 2010 Alamo Group In c. ASSEMBL Y Boom Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54465 1 BOOM 2. 54489 1 CYLINDER, BOOM 3. 54503 1 CYLINDE R, DIPPERSTICK 4. 47318 2 PIN, 1-1/4 X 6.62 5. 41838-54 2 SCREW , CAP 3/8-16 X 2.
ASSEMBLY 60C 01/10 Assembly Section 3-12 © 2010 Alamo Group Inc. ASSEMBL Y Dipperstick and Bucket Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-13 © 2010 Alamo Group In c. ASSEMBL Y Dipperstick and Bucket Assembly Part s List ITEM P ART NO. QTY DESCRIPTION 1. 54477 1 DIPPERSTICK 2. 54485 1 LINK, BUCKET INNER 4 BAR 3. 54487 1 LINK, GUIDE 4. 54488 1 LINK, GUIDE PLA TE 5.
ASSEMBLY 60C 01/10 Assembly Section 3-14 © 2010 Alamo Group Inc. ASSEMBL Y V alve Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-15 © 2010 Alamo Group In c. ASSEMBL Y V alve Assembly Parts List ITEM P ART NO. QTY . DESCRIPTION 1. 54361 1 DETENT KIT IN 4TH POSITION 2. 54362 6 ANTISHOCK V AL VE (180 - A BAR) 3. 54363 5 SPOOL RETURN ACTION 4.
ASSEMBLY 60C 01/10 Assembly Section 3-16 © 2010 Alamo Group Inc. ASSEMBL Y Hydraulic Schematic.
ASSEMBLY 60C 01/10 Assembly Section 3-17 © 2010 Alamo Group In c. ASSEMBL Y Hydraulic Schematic Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 53389 1 V AL VE, 2150 PSI 2. 34128-3 6 FITTING , ELBOW 90° 3. 32845-1 6 FITTING , ELBOW 90° 4. 32845-2 2 FITTING , ELBOW 90° 5.
ASSEMBLY 60C 01/10 Assembly Section 3-18 © 2010 Alamo Group Inc. ASSEMBL Y Seat Assembly.
ASSEMBLY 60C 01/10 Assembly Section 3-19 © 2010 Alamo Group In c. ASSEMBL Y Seat Assembly Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54295 1 SEA T 2. 53713 1 PEDEST AL, LOWER SEA T 3. 53708 1 TUBE, SEA T 4. 5371 1 1 BASE, SEA T 5. 41840-3 4 NUT , LOCK 3/8-16 6.
ASSEMBLY 60C 01/10 Assembly Section 3-20 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - Swing Cylinder Assembly - Swing Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54497 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5.
ASSEMBLY 60C 01/10 Assembly Section 3-21 © 2010 Alamo Group In c. ASSEMBL Y Cylinder Assembly - Bucket Cylinder Assembly - Bucket Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 5451 1 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5.
ASSEMBLY 60C 01/10 Assembly Section 3-22 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - Boom Cylinder Assembly - Boom Parts List ITEM P ART NO. QTY . DESCRIPTION 1. 54490 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5.
ASSEMBLY 60C 01/10 Assembly Section 3-23 © 2010 Alamo Group In c. ASSEMBL Y Cylinder Assembly - Dipper Cylinder Assembly - Dipper Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 54504 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5.
ASSEMBLY 60C 01/10 Assembly Section 3-24 © 2010 Alamo Group Inc. ASSEMBL Y Cylinder Assembly - St abilizer Cylinder Assembly - St abilizer Part s List ITEM P ART NO. QTY . DESCRIPTION 1. 47268 1 ROD, WELDMENT 2. * 1 SEAL, DUST 3. * 1 SEAL, U-CUP 4. * 1 SEAL, PISTON WIPER 5.
Operation Section 4-1 OPERA TION SECTION.
OPERATION 60C 01/10 Operation Section 4-2 © 2010 Alamo Group Inc. OPERA TION CAUTION: T o avoid possible inju ry , observe the following safety rules BEFORE OPERA TING backhoe. • Be sure area is clear of underground utilities or other hazards. • Position a barricade around work area.
OPERATION 60C 01/10 Operation Section 4-3 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. Move dipperstick away and curl bucket by moving lever back and to the right. Move dipperstick away and extend (dump) bucket by moving lever forward and to the right.
OPERATION 60C 01/10 Operation Section 4-4 © 2010 Alamo Group Inc. OPERA TION FILLING BUCKET Control the bucket attitude throughout the diggi ng cycle to keep teeth at the proper angle for best penetrati on. This will minimize dragging and scraping the bucket through the ground.
OPERATION 60C 01/10 Operation Section 4-5 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. Position the unit so the backhoe swin g post is over the center line of the tr ench connection. Dig with the backhoe at extrem e swing positions, and in as close to the stabilizers as possible.
OPERATION 60C 01/10 Operation Section 4-6 © 2010 Alamo Group Inc. OPERA TION MISCELLANEOUS When finishing straight walls or bell holes in sandy soil, use a platform under the rear tires and stabilizers. The platform distributes the load ove r a larger area and lessens the possibility of a cave-in.
OPERATION 60C 01/10 Operation Section 4-7 © 2010 Alamo Group Inc. OPERA TION © 2010 Alamo Group Inc. MOUNTING AND DISMOUNTING BUCKETS Mount buckets using 1 x 6-5/8 anti-rotation pins (1), 5/16 x 2” cap screws (2) and lock nuts (3). PLACING THE ST ABILIZERS Set the stabilizers to remove we ight from the rear wheels.
OPERATION 60C 01/10 Operation Section 4-8 © 2010 Alamo Group Inc. OPERA TION TRANSPORTING THE BACKHOE CAUTION: T o avoid possible injury , observe the following safety rules BEFORE OPERA TING backhoe. • T ravel slowly over rough terrain , on hillsides, and around curves to prevent tipping.
Maintenanc e Section 5-1 © 2010 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-2 © 2010 Alamo Group Inc. MAINTENANCE CYLINDER SERVICE Cylinder are designed to be relia ble and easy to service. If a cylinder should malfunction du ring warranty period, return complete cylinder asse mbly , without disassembl ing, to your authorized service department for instructions.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-3 © 2010 Alamo Group Inc. MAINTENANCE CAUTION: T o avoid possible inju ry , observe the following safety rule s when servicing backhoe. • Do not oil, grease or adjust backhoe while it is in motion. • Do not change any backhoe relief valve settings.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-4 © 2010 Alamo Group Inc. MAINTENANCE BUCKET TOOTH POINTS Bucket tooth points are self -sharpen ing and will require little attention. However , p oints can be replaced when they become badly worn or broken.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-5 © 2010 Alamo Group Inc. MAINTENANCE HYDRAULIC TROUBLESHOOTING Hydraulic troubleshooting materi al presented in this section is offered as a guide to diagnosing probable cause s and remedies for general operational problems.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-6 © 2010 Alamo Group Inc. MAINTENANCE This valve is a precision device and is not inten ded for extensive field adjustment or repair . Fiel d replacement parts are limited to seal kits, cartridges and tie rod ends.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-7 © 2010 Alamo Group Inc. MAINTENANCE V AL VE SERVICE T op of valve is defined as side where joysticks are installed. Before servicing valve, ma ke sure backhoe has b oom locked, stabilizers locked, and dipper in do wn position.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-8 © 2010 Alamo Group Inc. MAINTENANCE.
MAINTENANCE 60C 01/1 0 Maintenance Section 5-9 © 2010 Alamo Group Inc. MAINTENANCE P ARTS LIST ITEM DESCRIPTION QTY . NO. 1O - R I N G 1 2O - R I N G 1 3 V AL VE BODY/RELIEF 1 4P I S T O N 1 5S P R I N G 1 6O - R I N G 1 7R E G I S T E R 1 8 NUT , M16-1 .
MAINTENANCE 60C 01/10 Maintenance Section 5-10 © 2010 Alamo Group Inc. MAINTENANCE PROPER TORQUE FOR F ASTENERS.
.
ALAMO SMC LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Alamo SMC warrants for one year from the purchase date to t he original non- commercial, governmental, or municipal purchase r (“Purchaser”.
T O THE OWNER/OPERA T OR/DEALER T o keep your implement running efficiently a nd safely , read your manual thoroughly a nd follow these directions and the Safety Messages in this Manual. The T able of Contents clearly ide ntifies each section where you can easily find the informa tion you need.
60C-SOM-01/10 P/N F-4163C Printed U.S.A.
An important point after buying a device Alamo 60C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alamo 60C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alamo 60C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alamo 60C you will learn all the available features of the product, as well as information on its operation. The information that you get Alamo 60C will certainly help you make a decision on the purchase.
If you already are a holder of Alamo 60C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alamo 60C.
However, one of the most important roles played by the user manual is to help in solving problems with Alamo 60C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alamo 60C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
