Instruction/ maintenance manual of the product SL6.2M Electro-Voice
Go to page of 4
Model SL6.2M Extended Range High Output Speaker T echnical Specifications: General Description: The SL6.2M provides high efficiency , high power handling, and extended frequency response in a very compact, plastic enclosure.
P ac king List Listed and illustrated below are the parts in- cluded in each boxed pair of EVID™ speakers. Product Feature Identification Illustrated below are the major components of the EVID™ Series full-range speakers.
Attach both logo caps as shown in Figure 8 after tightening and securing the speaker. Step 3: Wire the Speaker Connect the wires to the speaker at the back terminal plate observing the polarity of the connections. The push-terminals accept banana connector plugs.
Architecture & Engineering Specs: The loudspeaker shall be a two-way system consisting of one 6” (152mm) low-frequency transducer , a 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and a frequency- dividing network installed in a vented, line-array enclosure.
An important point after buying a device Electro-Voice SL6.2M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electro-Voice SL6.2M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electro-Voice SL6.2M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electro-Voice SL6.2M you will learn all the available features of the product, as well as information on its operation. The information that you get Electro-Voice SL6.2M will certainly help you make a decision on the purchase.
If you already are a holder of Electro-Voice SL6.2M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electro-Voice SL6.2M.
However, one of the most important roles played by the user manual is to help in solving problems with Electro-Voice SL6.2M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electro-Voice SL6.2M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
