Instruction/ maintenance manual of the product R200 Electro-Voice
Go to page of 12
OWNERS MANUAL R200 SERIES WIRELESS.
R200 OWNERS MANUAL page 2 TABLE OF CONTENTS DESCRIPTION .......................................................................................................................................... 3 R200 SERIES COMPONETS ................................
R200 OWNERS MANUAL page 3 Description R200 SERIES OWNER’S MANUAL System Features True-diversity system with Secure-Phase tm en- sures maximum range and freedom from inter- ference Well-desig.
R200 OWNERS MANUAL page 4 Up to 10 hours of operation on a 9-volt alkaline battery QUICK SETUP AND USE To get your system into operation quickly, use the following instructions. Review the rest of the manual for additional setup and operational de- tails.
R200 OWNERS MANUAL page 5 clockwise to increase range. Caution! In- creasing the range will make the system more susceptible to outside interference ! If the squelch is being adjusted, turn the transmitter off. Turn the squelch control counter-clockwise until you hear noise or in- terference.
R200 OWNERS MANUAL page 6 COMPATIBILITY The receiver and transmitter must be on the same UHF frequency to operate together. Because of the specialized equipment required to adjust these units properly, users cannot change the fre- quencies or make any internal adjustments.
R200 OWNERS MANUAL page 7 SPECIFICATIONS RCU and GRU Receivers Receiver Type Single-frequency, single-conversion superheterodyne FM Frequency Range (RF) 710.100 721.350 MHz Available Frequencies: 710.100; 714.200; 714.700; 715.100; 716.200; 719.700; 720.
R200 OWNERS MANUAL page 8 FCC REGULATIONS The Electro-Voice Models HTUC, HTUD, BGU and BPU Transmitters are Type Accepted under United States Federal Communications Commis- sion Part 74H. The Electro-Voice Models RCU and GRU Receivers are accepted under the Part 15 Notification Procedure of the Federal Commu- nications Commission.
R200 OWNERS MANUAL page 9 Problem Possible Causes Solutions No audio Transmitter audio switch is off. Turn on transmitter audio switch. Disconnected or damaged receiver audio Connect, repair, or replace cable. cable Transmitter power switch is off. Turn transmitter power switch on, with level down on mixer/preamp/amplifier.
R200 OWNERS MANUAL page 10 INSTALATION FOR RECEIVER RACK MOUNT KIT R-Series wireless receivers can be rack mounted with the optional RMR kit. The RMR allows two receivers to be mounted side-by-side in a single rack space. Attach Bracket to Receiver 1.
R200 OWNERS MANUAL page 11.
R200 OWNERS MANUAL page 12 MANUAL - R200 Series W ireless Part Number 535428 — 9902 600 Cecil Street, Buchanan, MI 49107 800/234-6831, 616/695-6831, 616/695-1304 Fax ©T elex Communications, Inc.
An important point after buying a device Electro-Voice R200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electro-Voice R200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electro-Voice R200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electro-Voice R200 you will learn all the available features of the product, as well as information on its operation. The information that you get Electro-Voice R200 will certainly help you make a decision on the purchase.
If you already are a holder of Electro-Voice R200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electro-Voice R200.
However, one of the most important roles played by the user manual is to help in solving problems with Electro-Voice R200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electro-Voice R200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
